{"product_id":"iscar-3398037-corner-radius-end-mill-5-8-in-4-flute-carbide","title":"Iscar 3398037 Corner Radius End Mill 5\/8 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 3398037 is a solid carbide corner radius end mill from the ECI-4-VF series, designed for high-performance milling across a wide range of demanding workpiece materials. It carries a 5\/8 inch (0.625 inch) cutting diameter, a 1 inch length of cut, and a 4 inch overall length, making it well suited for short-reach applications where rigidity matters. The AlTiCrSiN PVD coating extends tool life in heat-intensive cuts. With four flutes, right-hand cutting and flute direction, variable index geometry, and a 38-degree helix angle, this end mill handles both roughing and finishing passes. A 0.015 inch corner radius reduces corner chipping and promotes cleaner transitions at part features. The shank diameter is 0.625 inches with an h6 tolerance for consistent toolholder fit.\u003c\/p\u003e\n\u003cp\u003eThis end mill is rated for use in steel, stainless steel, cast iron, superalloys, titanium, and hard materials, covering ISO material codes P, M, K, S, and H. It is centercutting, allowing plunge entry, and the extended reach configuration with a 2 inch reach length gives access to deeper pockets without sacrificing shank integrity. The straight-cylindrical shank is compatible with standard collet chucks and toolholders. It is a single-end tool with a submicron carbide grade and normal pitch flute spacing. Typical applications include die and mold work, aerospace component machining, and general precision part manufacturing where tight tolerances and surface finish are required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide submicron grade construction for wear resistance in hard and abrasive materials\u003c\/li\u003e\n  \u003cli\u003eAlTiCrSiN PVD coating provides thermal and oxidation resistance at elevated cutting temperatures\u003c\/li\u003e\n  \u003cli\u003eVariable index geometry reduces harmonics and chatter during aggressive cuts\u003c\/li\u003e\n  \u003cli\u003e0.015 inch corner radius minimizes corner breakage and supports fine part geometry\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows direct plunge milling without a pre-drilled entry\u003c\/li\u003e\n  \u003cli\u003eExtended reach with 2 inch reach length and h6 shank tolerance for precise toolholder engagement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard collet-style and hydraulic toolholders accepting a 5\/8 inch straight-cylindrical shank. The manufacturer catalog reference for this tool is ECI-4 625-1.0\/2.0C015VF4.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or CNC setup technician. Ensure the toolholder and spindle are clean and free of debris before seating the shank. Verify runout with a dial indicator after clamping, as the h6 shank tolerance is intended for close-fit holders. Follow machine tool manufacturer guidelines for maximum spindle speed and feed rate when cutting superalloys or hard materials, and confirm coolant strategy before beginning a cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReach Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Tolerance\u003c\/strong\u003e: h6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.015 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 38 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide, Submicron Grade\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: AlTiCrSiN (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Corner Radius\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Short\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Index\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Removal Type\u003c\/strong\u003e: Roughing and Finishing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Superalloys, Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: ECI-4-VF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.76 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27112803\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3398037\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51728751329586,"sku":"3398037","price":217.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/76aebafa75cad44d31f5c4a0535535fb_8c09ee15-bce2-4bf4-9b41-b7a0a869464a.jpg?v=1788695824","url":"https:\/\/voomisupply.com\/products\/iscar-3398037-corner-radius-end-mill-5-8-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}