{"product_id":"iscar-3311779-t-slot-milling-tip-1-488-in-10-flute-ic908","title":"Iscar 3311779 T-slot Milling Tip 1.488 in 10 Flute IC908","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 3311779 is a replaceable carbide milling tip designed for T-slot milling operations. It features a 1.488-inch cutting diameter, a 0.375-inch cutting width, and a maximum depth of cut of 0.393 inches. The tip is manufactured from sub-micrograin carbide in the IC908 grade and carries a PVD-applied TiAlN coating for extended wear resistance at elevated cutting temperatures. With 10 flutes and a 90-degree lead angle, it is engineered for efficient chip formation and surface finish in demanding T-slot applications. Licensed machinists and CNC tooling specialists are the primary installers of this type of replaceable tip system.\u003c\/p\u003e\n\u003cp\u003eThis milling tip is suited for machining a broad range of workpiece materials, including steel, stainless steel, cast iron, non-ferrous metals, superalloys, titanium, and hard materials (ISO material codes P, M, K, N, S, and H). It is appropriate for both production and job-shop environments where T-slot features are required in components such as machine tool tables, fixture plates, and structural assemblies. The SD-SP style and right-hand cutting orientation make it compatible with ISCAR SD-SP series T-slot milling bodies. No coolant-through capability is present on this tip.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSub-micrograin IC908 carbide grade for toughness and wear resistance in interrupted and continuous cuts\u003c\/li\u003e\n  \u003cli\u003ePVD TiAlN coating extends tool life across steel, stainless steel, cast iron, and superalloy applications\u003c\/li\u003e\n  \u003cli\u003e10-flute configuration promotes higher feed rates and improved surface finish in T-slot profiles\u003c\/li\u003e\n  \u003cli\u003e90-degree lead angle and 0.016-inch corner radius provide clean shoulder and slot wall definition\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting orientation, SD-SP style, conforms to ANSI standards\u003c\/li\u003e\n  \u003cli\u003eReplaceable tip design reduces changeover time and eliminates the need to replace the full milling body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with ISCAR SD-SP series T-slot milling bodies accepting the D1.50-H375D insert size. Confirm body seat geometry and clamping system against the ISCAR SD-SP product line before ordering.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of replaceable milling tips should be performed by qualified machinists or CNC tooling technicians with the machine fully powered down and the spindle locked. Use the manufacturer-specified torque wrench and seating tool to avoid tip distortion or seat damage. Inspect the milling body seat for chips, wear, or corrosion before seating a new tip. Follow the machine tool builder and ISCAR guidelines for runout verification after tip installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMilling Tip Type\u003c\/strong\u003e: T-Slot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStyle\u003c\/strong\u003e: SD-SP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 1.488 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.393 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.393 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.016 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 10\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 90 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Carbide (Sub Micrograin)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IC908\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: None\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 3311779\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51750745637170,"sku":"3311779","price":309.41,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ca5af23a96d60cd407b49593449459a2_b793e487-11d5-49b6-884d-e409c923502a.jpg?v=1788919271","url":"https:\/\/voomisupply.com\/products\/iscar-3311779-t-slot-milling-tip-1-488-in-10-flute-ic908","provider":"Voomi Supply","version":"1.0","type":"link"}