{"product_id":"iscar-2801143-internal-grooving-toolholder-0-094in-cut-depth","title":"Iscar 2801143 Internal Grooving Toolholder 0.094in Cut Depth","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe ISCAR 2801143 is a right-hand internal indexable grooving toolholder from the Cut Grip series, designed for precision internal grooving on CNC turning centers and lathes. With a maximum depth of cut of 0.094 inches and a groove width range of 0.075 to 0.095 inches, it handles tight-tolerance internal groove applications across a broad range of workpiece materials. The toolholder features a 0.625-inch round shank and an overall length of 5 inches, with through-coolant capability to manage heat and chip evacuation at the cutting zone. Licensed machinists and CNC lathe operators install this holder as part of a modular grooving system using compatible indexable inserts.\u003c\/p\u003e\n\u003cp\u003eThis toolholder is suited for internal non-face grooving operations in both production and job-shop environments. It is designed for use in applications involving materials classified under the universal material spectrum, including steel, stainless steel, cast iron, non-ferrous alloys, heat-resistant superalloys, and hardened materials. With a minimum hole diameter requirement of 0.492 inches, it is appropriate for small-bore internal grooving work where access space is limited. The GEHI-style head and clamp-style insert retention make it a practical choice for repetitive, high-volume internal groove cycles.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eRight-hand cutting direction for standard CNC lathe internal grooving operations\u003c\/li\u003e\n  \u003cli\u003eThrough-coolant support directs fluid directly to the cutting edge for improved tool life and chip control\u003c\/li\u003e\n  \u003cli\u003eClamp-style insert holding secures inserts firmly under interrupted or continuous cutting loads\u003c\/li\u003e\n  \u003cli\u003eCompatible with GEMI and GEPI series indexable insert families including full-radius and specialty variants\u003c\/li\u003e\n  \u003cli\u003eGEHI toolholder style with 0.860-inch head length for access into small-bore internal features\u003c\/li\u003e\n  \u003cli\u003eConforms to ISO 13399 tooling data standards for integration with CAM and tooling management systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible insert families include GEMI, GEMI (Full Radius), GEPI, GEPI (Full Radius), GEPI-MT, and GEPI-WT. The toolholder cross-references to manufacturer designation GEHIR\/L 15.9-13-2-T2.4. Complete insert compatibility codes are GEMI and GEPI series.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a qualified CNC machinist or toolroom technician. Before mounting the toolholder, power down the machine and confirm the turret is fully indexed and locked out per shop lockout\/tagout procedures. Verify the shank bore and coolant-through port alignment before securing the holder in the turret block. Do not exceed the maximum depth of cut specification, as doing so may overload the insert clamp and cause insert or holder damage.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Type\u003c\/strong\u003e: Internal Non-Face Grooving\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHand of Holder\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolholder Style\u003c\/strong\u003e: GEHI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Cut Grip\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.094 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Groove Width\u003c\/strong\u003e: 0.075 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Groove Width\u003c\/strong\u003e: 0.095 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Hole Diameter\u003c\/strong\u003e: 0.492 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 4.14 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHead Length\u003c\/strong\u003e: 0.860 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter to Cutting Edge\u003c\/strong\u003e: 0.410 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible Insert Families\u003c\/strong\u003e: GEMI, GEPI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThrough Coolant\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Universal (H, K, M, N, P, S)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: ISO 13399\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: ISCAR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 2801143\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ISCAR","offers":[{"title":"Default Title","offer_id":51752189854002,"sku":"2801143","price":332.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/174899a823eb574e106a0a9d4afc9921.jpg?v=1788926451","url":"https:\/\/voomisupply.com\/products\/iscar-2801143-internal-grooving-toolholder-0-094in-cut-depth","provider":"Voomi Supply","version":"1.0","type":"link"}