{"product_id":"irwin-iwax3019-ship-auger-bit-1-inch-hex-shank-hss","title":"Irwin IWAX3019 Ship Auger Bit 1 Inch Hex Shank Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe IRWIN IWAX3019 is a ship auger bit from the SPEEDBOR SUPREME series, designed for boring large, clean holes through wood framing, timber, and structural lumber. Built from high-speed steel (HSS) with an oxide coating, this bit delivers durability under repeated use in demanding jobsite conditions. It features a 1-inch hole diameter, a 7.5-inch overall length, and a 5-inch flute length that clears chips efficiently during deep boring. The hex shank provides a secure, slip-resistant grip in standard drill chucks and impact-compatible holders. Licensed electricians, plumbers, and general contractors commonly use ship auger bits when running conduit, pipe, or cable through wood framing members.\u003c\/p\u003e\u003cp\u003eThe IWAX3019 is suited for residential and light commercial construction and renovation work. Its ship auger bit design excels in through-boring applications where a standard twist bit or spade bit would struggle, particularly in thick dimensional lumber, engineered wood, or stacked framing. The standard point type ensures accurate entry without requiring a pilot hole. This bit is typically deployed by electricians fishing wire through joists and studs, plumbers routing supply or drain lines, and HVAC installers running refrigerant line sets or low-voltage control wiring.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1-inch hole diameter for full-size bore in a single pass through framing lumber\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction with oxide coating for corrosion resistance and extended edge life\u003c\/li\u003e\n\u003cli\u003e5-inch flute length promotes efficient chip ejection during deep cuts\u003c\/li\u003e\n\u003cli\u003e7.5-inch overall length reaches into tight framing cavities without extensions\u003c\/li\u003e\n\u003cli\u003eHex shank seats securely in drill chucks and compatible hex-drive holders\u003c\/li\u003e\n\u003cli\u003eStandard point type for accurate, no-wander entry into wood surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement and general-use ship auger bit compatible with standard 3-jaw drill chucks and hex-drive drill systems accepting a hex shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eShip auger bits are installed by electricians, plumbers, and HVAC technicians working on framing rough-in. Always disconnect power at the breaker or shut off water supply before boring near existing wiring or piping. Use a drill with adequate torque and a firm two-hand grip, as large-diameter bits in wood can produce significant kickback if the bit binds. Inspect the bit for wear or damage before each use and do not force a dull bit through dense material.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SPEEDBOR SUPREME\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuger Bit Type\u003c\/strong\u003e: Ship Auger Bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 7.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 8.1 inches L x 1.2 inches W x 1.2 inches H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.63 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 27111537\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IRWIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: IWAX3019\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IRWIN","offers":[{"title":"Default Title","offer_id":51539480510770,"sku":"IWAX3019","price":66.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1309884a14cc34c29817eea234c1fa62.jpg?v=1785841257","url":"https:\/\/voomisupply.com\/products\/irwin-iwax3019-ship-auger-bit-1-inch-hex-shank-hss","provider":"Voomi Supply","version":"1.0","type":"link"}