{"product_id":"irwin-iwax3017-ship-auger-bit-0-75-inch-hss","title":"Irwin IWAX3017 Ship Auger Bit 0.75 Inch Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe IRWIN IWAX3017 is a ship auger bit from the SPEEDBOR SUPREME series, designed for boring clean, deep holes through wood framing, timber, and structural lumber. Built from high-speed steel with an oxide coating, this bit delivers controlled cutting in demanding rough-in applications. It features a standard point type for positive starting without walking and a hex shank for secure chuck engagement on standard and magnetic-drive drill chucks. With a 0.75-inch cutting diameter, 5-inch flute length, and 7.5-inch overall length, it fits tight-clearance framing and utility drilling tasks common in residential and light commercial construction.\u003c\/p\u003e\u003cp\u003eThis ship auger bit is suited for electrical, plumbing, and HVAC rough-in work where boring through wall plates, joists, and beams is required. The 5-inch twist and flute length handle typical stud-bay depths in a single pass. The hex shank seats firmly in hex-compatible drills and right-angle drill attachments, making it practical in confined spaces. Licensed tradespeople in electrical, plumbing, and mechanical trades rely on this style of bit for running conduit, pipe, and flex duct pathways through structural members.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.75-inch hole diameter for standard rough-in boring applications\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction with oxide coating for durability and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHex shank provides secure, slip-resistant chuck engagement\u003c\/li\u003e\n\u003cli\u003e5-inch flute length handles single-pass boring through typical framing members\u003c\/li\u003e\n\u003cli\u003eStandard point type ensures accurate starting in wood without pre-drilling\u003c\/li\u003e\n\u003cli\u003ePart of the SPEEDBOR SUPREME series for consistent performance in utility drilling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with standard hex-shank-compatible drills, right-angle drill attachments, and magnetic hex chuck adapters commonly used in electrical, plumbing, and HVAC rough-in work.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is intended for installation by licensed tradespeople performing rough-in boring through wood framing and structural lumber. Ensure the drill is powered off and the chuck is fully seated on the hex shank before beginning. When boring near structural members, follow applicable building codes regarding minimum edge distances to avoid compromising structural integrity. Wear appropriate eye protection when operating auger bits, as wood chips and debris are ejected during cutting.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAuger Bit Type\u003c\/strong\u003e: Ship Auger Bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: SPEEDBOR SUPREME\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHole Diameter\u003c\/strong\u003e: 0.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 7.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwist Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions\u003c\/strong\u003e: 8.1 inches long x 1.2 inches wide x 1.2 inches high\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.45 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IRWIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: IWAX3017\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IRWIN","offers":[{"title":"Default Title","offer_id":51542741647666,"sku":"IWAX3017","price":54.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8732c3f71529b301320fe6d295361555.jpg?v=1785905914","url":"https:\/\/voomisupply.com\/products\/irwin-iwax3017-ship-auger-bit-0-75-inch-hss","provider":"Voomi Supply","version":"1.0","type":"link"}