{"product_id":"irwin-ir63904-hss-drill-bit-1-16-in-tin-135-deg-split-point","title":"Irwin IR63904 Hss Drill Bit 1\/16 in Tin 135 Deg Split Point","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe IRWIN IR63904 is a high speed steel jobber-length drill bit designed for general-purpose drilling in metal, wood, and plastic. The 1\/16 inch diameter bit features a titanium nitride (TiN) coating that increases surface hardness to 80 HRC, reducing friction and extending cutting life compared to uncoated HSS bits. The 135-degree split point tip allows self-centering entry and requires no center punch on most workpieces. Overall length is 1.875 inches with a 0.875 inch flute length. This bit is sold individually and is used by electricians, plumbers, HVAC technicians, and general tradespeople for pilot holes, sheet metal work, and precision small-diameter drilling.\u003c\/p\u003e\u003cp\u003eThe IR63904 fits standard drill chucks and is appropriate for hand-held power drills, drill presses, and right-angle drill attachments commonly used in residential and light commercial trade work. The jobber-length configuration provides a practical balance of rigidity and reach for typical on-site drilling tasks. At 1\/16 inch diameter, this bit is well suited for pilot hole applications in sheet metal, conduit, copper pipe flanges, and similar thin-material trade work where a small, accurate starting hole is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTitanium nitride (TiN) coating provides 80 HRC surface hardness for extended tool life\u003c\/li\u003e\n\u003cli\u003e135-degree split point enables self-centering entry without center punching\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction handles general-purpose metal, wood, and plastic drilling\u003c\/li\u003e\n\u003cli\u003eJobber-length geometry balances rigidity and reach for typical trade applications\u003c\/li\u003e\n\u003cli\u003e1\/16 inch diameter suited for pilot holes and precision small-diameter work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard jobber-length drill bit compatible with any 3-jaw or keyless drill chuck that accepts a 1\/16 inch shank, including hand-held power drills and bench-mounted drill presses.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall and remove drill bits only with the tool unpowered and the chuck fully released. Secure the workpiece before drilling to prevent movement, especially at small diameters where bit deflection and breakage risk increases. Use appropriate cutting fluid or lubricant when drilling ferrous metals to preserve coating life and reduce heat buildup. Dispose of worn bits in accordance with local sharps and metal-waste handling practices.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Diameter\u003c\/strong\u003e: 1\/16 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel (HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness\u003c\/strong\u003e: 80 HRC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBit Series\u003c\/strong\u003e: Jobber Length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold As\u003c\/strong\u003e: Each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUPC\u003c\/strong\u003e: 042526639043\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IRWIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: IR63904\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IRWIN","offers":[{"title":"Default Title","offer_id":51347376144690,"sku":"IR63904","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/310499698.jpg?v=1782103067","url":"https:\/\/voomisupply.com\/products\/irwin-ir63904-hss-drill-bit-1-16-in-tin-135-deg-split-point","provider":"Voomi Supply","version":"1.0","type":"link"}