{"product_id":"irwin-322004-sds-plus-hammer-drill-bit-3-16-x-4-x-6-inch","title":"Irwin 322004 Sds-plus Hammer Drill Bit 3\/16 X 4 X 6 Inch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe IRWIN 322004 is an SDS-Plus hammer drill bit designed for fast, controlled drilling into concrete and masonry. Part of the SPEEDHAMMER PLUS line, it features a carbide tip that prevents the bit from walking at the start of a hole, giving the operator clean, accurate entry. The spiral flute geometry moves debris out of the hole quickly, reducing clogging and minimizing vibration during use. The short drilling head limits breakout on through-hole applications, which helps produce cleaner exits on the back side of slabs, block, and tile. Trades that work with rotary hammer tools in concrete or masonry will recognize the value of that combination in a single bit.\u003c\/p\u003e\u003cp\u003eThis bit is intended for use with SDS-Plus and TE-C style rotary hammers on concrete, block, brick, and similar masonry substrates. The 3\/16 inch diameter suits smaller anchor and fastener holes common in residential and light commercial work. It fits jobsite rotary hammers from standard SDS-Plus chuck platforms used by electricians, plumbers, and general contractors when setting anchors or running conduit through concrete walls and slabs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCarbide tip provides controlled starts and resists walking on hard surfaces\u003c\/li\u003e\n\u003cli\u003eFlute design clears debris quickly to reduce clogging and heat buildup\u003c\/li\u003e\n\u003cli\u003eShort drilling head minimizes breakout on through-hole applications\u003c\/li\u003e\n\u003cli\u003eCompatible with all SDS-Plus and TE-C style rotary hammer chucks\u003c\/li\u003e\n\u003cli\u003e3\/16 inch cutting diameter suits anchor and fastener hole applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with all SDS-Plus and TE-C style rotary hammer drills. Fits the standard SDS-Plus chuck found on rotary hammers from most major tool manufacturers.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified tradesperson familiar with rotary hammer operation and applicable safety codes. Confirm the drill chuck is fully locked onto the bit shank before operating, and wear appropriate eye and hearing protection. When drilling through-holes near rebar or embedded conduit, verify the path with a scanning tool before drilling. Do not use this bit in standard keyless or keyed drill chucks — SDS-Plus and TE-C style chucks only.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChuck Type\u003c\/strong\u003e: SDS-Plus\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 3\/16 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Length\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type\u003c\/strong\u003e: Concrete Bit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Height\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Length\u003c\/strong\u003e: 10.2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Width\u003c\/strong\u003e: 1.1 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.109 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin\u003c\/strong\u003e: China\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IRWIN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 322004\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IRWIN","offers":[{"title":"Default Title","offer_id":51138635825458,"sku":"322004","price":30.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/305526493.jpg?v=1778260807","url":"https:\/\/voomisupply.com\/products\/irwin-322004-sds-plus-hammer-drill-bit-3-16-x-4-x-6-inch","provider":"Voomi Supply","version":"1.0","type":"link"}