{"product_id":"ipex-9861213-cpvc-sch-80-close-nipple-1-1-2-in-x-110mm","title":"Ipex 9861213 Cpvc Sch 80 Close Nipple 1-1\/2 in X 110MM","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe IPEX 9861213 is a CPVC Schedule 80 close nipple rated for demanding industrial and plumbing applications. It connects two female threaded fittings at each end using standard NPT threading. Built from Xirtec CPVC material, this nipple handles a maximum service temperature of 200 degrees F under pressure, with occasional exposure to boiling water at 212 degrees F. The material carries a design stress rating of 2,000 psi at 73 degrees F, making it suitable for pressure-bearing installations. Licensed plumbers and pipefitters install this fitting in chemical, hot-water, and industrial piping systems where corrosion resistance and thermal performance are priorities.\u003c\/p\u003e\n\u003cp\u003eThis close nipple is sized at 1-1\/2 inches x 110MM and is designed for use in residential and commercial piping systems where CPVC Schedule 80 material is specified. Typical applications include hot and cold water distribution, chemical processing lines, and industrial fluid handling. The short face-to-face length of a close nipple makes it the correct choice when minimal spacing is needed between two female-threaded fittings or valves.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eMaximum service temperature of 200 degrees F under pressure, with occasional boiling-water exposure at 212 degrees F\u003c\/li\u003e\n  \u003cli\u003eDesign stress of 2,000 psi at 73 degrees F for reliable pressure-rated performance\u003c\/li\u003e\n  \u003cli\u003eCPVC construction resists rust, pitting, scaling, and corrosion on interior and exterior surfaces\u003c\/li\u003e\n  \u003cli\u003eRequires less than half the energy to produce compared to equivalent carbon steel or steel alloy pipe, reducing embodied energy in the system\u003c\/li\u003e\n  \u003cli\u003eClose nipple configuration connects two FPT fittings with minimal thread exposure between them\u003c\/li\u003e\n  \u003cli\u003eSchedule 80 wall thickness provides additional pressure capacity over Schedule 40\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or new-installation fitting for CPVC Schedule 80 threaded piping systems requiring a 1-1\/2 inch close nipple connection.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with applicable local plumbing codes and ASTM standards for CPVC piping. Shut off system pressure and drain the line before removing or installing any threaded fittings. Use a thread sealant or tape rated for CPVC compatibility — do not use petroleum-based compounds, which can degrade CPVC material. Avoid over-torquing threaded connections, as CPVC fittings can crack under excessive mechanical force.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: CPVC (Xirtec)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchedule\u003c\/strong\u003e: Schedule 80\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 1-1\/2 inches x 110MM\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Close Nipple\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Male NPT both ends (FPT-to-FPT application)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Service Temperature\u003c\/strong\u003e: 200 degrees F (93 degrees C) under pressure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntermittent Temperature Exposure\u003c\/strong\u003e: 212 degrees F (100 degrees C)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDesign Stress\u003c\/strong\u003e: 2,000 psi at 73 degrees F (23 degrees C)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IPEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 9861213\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IPEX","offers":[{"title":"Default Title","offer_id":51268013850930,"sku":"9861213","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308913760.jpg?v=1780696947","url":"https:\/\/voomisupply.com\/products\/ipex-9861213-cpvc-sch-80-close-nipple-1-1-2-in-x-110mm","provider":"Voomi Supply","version":"1.0","type":"link"}