{"product_id":"ipex-36451-pvc-schedule-80-nipple-1-1-2-in-x-2-in-male-thread","title":"Ipex 36451 Pvc Schedule 80 Nipple 1-1\/2 in X 2 in Male Thread","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe IPEX 36451 is a Schedule 80 PVC nipple fitting designed for threaded pipe connections in potable water and general plumbing systems. Sized at 1-1\/2 inches with a 2-inch overall length, it features male threaded ends on both sides for direct coupling to female-threaded fittings, valves, or equipment ports. The fitting is injection molded from gray PVC conforming to ASTM D1784, D1785, and D2467, delivering uniform wall thickness and consistent pressure-handling performance. Smooth interior walls reduce friction loss and support higher flow volume compared to conventional metal fittings. Rated to 140 degrees F, this nipple suits a range of pressurized water distribution applications handled by licensed plumbers and mechanical contractors.\u003c\/p\u003e\n\u003cp\u003eThis fitting is specified for potable water systems and is compliant with applicable NSF standards, making it appropriate for both residential and light commercial plumbing installations. The male-threaded-by-male-threaded configuration allows it to be used as a close or short extension nipple between two female connections. Typical install scenarios include service drops, valve isolation sections, pump discharge assemblies, and manifold connections where a short threaded extension is required between fittings or components.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSchedule 80 PVC construction meets ASTM D1784, D1785, and D2467 material specifications\u003c\/li\u003e\n  \u003cli\u003eMale threaded x male threaded end connections for direct coupling to female-threaded components\u003c\/li\u003e\n  \u003cli\u003eNSF-listed for potable water service\u003c\/li\u003e\n  \u003cli\u003e140 degrees F temperature rating suitable for pressurized cold and warm water lines\u003c\/li\u003e\n  \u003cli\u003eInjection molded for uniform wall thickness and consistent stress distribution\u003c\/li\u003e\n  \u003cli\u003eSmooth interior bore minimizes pressure drop and supports full flow volume\u003c\/li\u003e\n  \u003cli\u003eLifetime limited warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style Schedule 80 PVC threaded nipple for 1-1\/2-inch pipe systems used in potable water distribution, irrigation, and general industrial plumbing assemblies.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and applicable local codes. Depressurize and drain the system before removing or installing any threaded fitting. Apply an NSF-approved thread sealant or PTFE tape to male threads before assembly and tighten to hand-tight plus one to two turns using strap wrenches or smooth-jaw pliers — avoid pipe wrenches that can crack PVC. Do not over-torque; PVC threads are susceptible to stress fractures if over-driven.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFitting Type\u003c\/strong\u003e: Nipple\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSize\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSchedule\u003c\/strong\u003e: 80\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Connection\u003c\/strong\u003e: Male Threaded x Male Threaded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: PVC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Specification\u003c\/strong\u003e: ASTM D1784 \/ D1785 \/ D2467\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProcess\u003c\/strong\u003e: Injection Molded\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Gray\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTemperature Rating\u003c\/strong\u003e: 140 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Potable Water System\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplicable Standard\u003c\/strong\u003e: NSF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging Quantity\u003c\/strong\u003e: 25 per inner pack, 1000 per master carton\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: Lifetime Limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IPEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 36451\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IPEX","offers":[{"title":"Default Title","offer_id":51268850942258,"sku":"36451","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/308913601.jpg?v=1780707559","url":"https:\/\/voomisupply.com\/products\/ipex-36451-pvc-schedule-80-nipple-1-1-2-in-x-2-in-male-thread","provider":"Voomi Supply","version":"1.0","type":"link"}