{"product_id":"ipex-257472-frpp-acid-waste-reducing-bushing-2x1-5-in","title":"Ipex 257472 Frpp Acid Waste Reducing Bushing 2x1.5 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe IPEX 257472 is a flame-retardant polypropylene (FRPP) reducing bushing designed for chemical and acid waste drainage systems. Part of the Enfield electrofusion-joint system, this fitting connects 2-inch fusion sockets to 1-1\/2-inch spigot ends in non-return-air plenum chemical waste piping. The polypropylene construction provides an operating temperature range of -10 degrees F to 212 degrees F, allowing systems to be flushed with boiling water without degrading the joint or fitting. It is listed to NSF 14 and IAPMO standards and complies with ASTM F1412 and ASTM D4101. Licensed plumbers and mechanical contractors working on corrosive waste systems are the primary installers of this fitting.\u003c\/p\u003e\n\u003cp\u003eThe 257472 is suited for corrosive and acid waste drain lines in laboratory, industrial, educational, and healthcare facilities where chemical resistance is required. The Enfield system is intended for virtually all non-return-air plenum chemical waste applications. The electrofusion joint method allows multiple joints to be made simultaneously, reducing installation time compared to traditional glass or PVC drain systems. The FRPP material is also available in a non-flame-retardant polypropylene (NFRPP) version upon request.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFlame-retardant polypropylene (FRPP) construction compliant with ASTM F1412 and ASTM D4101\u003c\/li\u003e\n  \u003cli\u003eOperating temperature range of -10 degrees F to 212 degrees F for compatibility with boiling-water flush procedures\u003c\/li\u003e\n  \u003cli\u003eElectrofusion joint system with heavy-gauge resistance wire molded into sockets — no loose components\u003c\/li\u003e\n  \u003cli\u003eFusion joints can be completed in approximately 2 minutes, with several joints made at one time\u003c\/li\u003e\n  \u003cli\u003eNSF 14 listed and IAPMO certified for corrosive waste drainage systems\u003c\/li\u003e\n  \u003cli\u003eMaintenance-free design with no glass breakage risk; installed cost significantly lower than glass systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use within the IPEX Enfield electrofusion-joint system for non-return-air plenum chemical waste drainage applications using FRPP or NFRPP pipe and fittings.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of the Enfield electrofusion system requires the Microprocessor-controlled Enfusion unit to ensure repeatable, secure joints — do not attempt fusion without the proper control unit. Licensed plumbers or mechanical contractors should perform installation in accordance with applicable plumbing codes such as the IPC. Shut off all flow and depressurize the line before cutting in or replacing fittings. Follow the manufacturer's fusion procedure for socket terminal connections; the heavy-duty terminal posts include protection ears that must remain undamaged for a proper electrical connection.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Flame-Retardant Polypropylene (FRPP)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Fusion Socket x Spigot\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInlet Size\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutlet Size\u003c\/strong\u003e: 1-1\/2 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range\u003c\/strong\u003e: -10 degrees F to 212 degrees F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard Compliance\u003c\/strong\u003e: ASTM F1412, ASTM D4101\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: NSF 14, IAPMO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Chemical and acid waste drainage, non-return-air plenum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IPEX\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 257472\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IPEX","offers":[{"title":"Default Title","offer_id":51468565446962,"sku":"257472","price":44.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/313946642.jpg?v=1783917794","url":"https:\/\/voomisupply.com\/products\/ipex-257472-frpp-acid-waste-reducing-bushing-2x1-5-in","provider":"Voomi Supply","version":"1.0","type":"link"}