{"product_id":"internal-tool-83-1030-c-woodruff-keyseat-cutter-solid-carbide","title":"Internal Tool 83-1030-C Woodruff Keyseat Cutter Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe INTERNAL TOOL 83-1030-C is a solid carbide Woodruff keyseat cutter designed for cutting keyseat slots in shafts and workpieces across a range of metal types. It features a 3\/16 inch (0.1870 inch) cutter diameter with a 1\/16 inch (0.0625 inch) cutting width and a straight tooth configuration. The tool carries an AlTiN coating for heat resistance and extended tool life in demanding cutting conditions. With 6 teeth and a micrograin carbide grade, it is built for consistent performance in milling operations requiring precise, narrow slot geometry.\u003c\/p\u003e\n\u003cp\u003eThis keyseat cutter is suited for use on steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium. It is a common choice for machining operations where a standard Woodruff key slot must be cut to close tolerances. The 3\/16 inch shank diameter (0.1870 inch) fits standard collet and milling setups. The overall length of 2.5 inches allows clearance in most vertical and horizontal milling machine spindles. Machinists and tool and die technicians working in production or job-shop environments will find this cutter appropriate for both roughing and finishing keyseat passes in a single setup.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide micrograin construction for rigidity and wear resistance in hard and abrasive workpiece materials\u003c\/li\u003e\n  \u003cli\u003eAlTiN coating provides thermal protection and reduces friction at elevated cutting speeds\u003c\/li\u003e\n  \u003cli\u003eStraight tooth configuration delivers clean slot geometry in keyseat milling applications\u003c\/li\u003e\n  \u003cli\u003e6-tooth design balances chip clearance with cutting engagement across compatible materials\u003c\/li\u003e\n  \u003cli\u003eNeck diameter of 0.0930 inches and neck length of 0.5620 inches allow reach into shallow pockets without interference\u003c\/li\u003e\n  \u003cli\u003eNo Weldon flat on shank  -  seats directly in precision collet chucks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eCompatible with steel, stainless steel, cast iron, non-ferrous metals, superalloys, and titanium workpieces (workpiece material codes P, M, K, N, S). Designed for use in standard milling machine setups accepting a 3\/16 inch shank diameter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist using a collet or end mill holder rated for the 3\/16 inch shank diameter. Confirm runout on the collet before cutting to maintain slot width tolerance. Power down the milling machine spindle completely before tool changes. Do not exceed the tool manufacturer's recommended surface footage for the workpiece material being cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 3\/16 inch (0.1870 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 1\/16 inch (0.0625 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/16 inch (0.1870 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.0930 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.5620 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Teeth\u003c\/strong\u003e: 6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTooth Configuration\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide, Micrograin Grade\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: AlTiN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Shank\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeldon Flat\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Superalloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 83\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.4 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241631\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: INTERNAL TOOL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 83-1030-C\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"INTERNAL TOOL","offers":[{"title":"Default Title","offer_id":67906986017074,"sku":"83-1030-C","price":94.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/24aa6f5148fceb2f561a38d800f87335.jpg?v=1791173100","url":"https:\/\/voomisupply.com\/products\/internal-tool-83-1030-c-woodruff-keyseat-cutter-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}