{"product_id":"internal-tool-80-1170-convex-radius-cutter-solid-carbide","title":"Internal Tool 80-1170 Convex Radius Cutter Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe INTERNAL TOOL 80-1170 is a solid carbide convex radius cutter designed for precision profile milling on a wide range of metallic workpieces. It features a 0.0625 inch cutter radius and a 1.25 inch cutter diameter, with a profile ground relief style that delivers consistent edge geometry and repeatable surface finish. The 10-tooth configuration supports smooth chip evacuation at production feed rates. This cutter is intended for use by machinists and tooling professionals working on CNC machining centers or manual mills where tight radius control and long tool life are required.\u003c\/p\u003e\u003cp\u003eThis convex radius cutter is suited for operations on steel, stainless steel, cast iron, non-ferrous metal, super alloys, and titanium. The uncoated solid carbide construction performs across this broad material range without the dimensional variation that coatings can introduce on close-tolerance profile work. It mounts via a standard shank connection with a 0.5 inch shank diameter, making it compatible with common collet and end mill holders found in most production and job shop environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance across ferrous and non-ferrous materials\u003c\/li\u003e\n\u003cli\u003e0.0625 inch cutter radius with profile ground relief for accurate convex form generation\u003c\/li\u003e\n\u003cli\u003e10-tooth design promotes chip clearance and surface finish consistency\u003c\/li\u003e\n\u003cli\u003e0.5 inch shank diameter fits standard collet chucks and end mill holders\u003c\/li\u003e\n\u003cli\u003eUncoated finish suitable for close-tolerance profiling where coating buildup would affect dimensional accuracy\u003c\/li\u003e\n\u003cli\u003eCompatible with steel, stainless steel, cast iron, non-ferrous metal, super alloys, and titanium workpiece materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use on CNC machining centers and manual mills with standard collet or end mill holders accepting a 0.5 inch shank diameter. Suitable for primary workpiece materials coded P, M, K, N, and S per ISO material classification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist following the machine tool manufacturer's toolholding torque and runout specifications. Ensure the spindle is fully powered down and locked before inserting or removing the cutter. Inspect the shank and holder bore for burrs or contamination before seating to maintain concentricity. Follow applicable shop safety procedures and machine guarding requirements during setup and operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Radius\u003c\/strong\u003e: 0.0625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.125 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Diameter\u003c\/strong\u003e: 0.28 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck Length\u003c\/strong\u003e: 0.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Teeth\u003c\/strong\u003e: 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelief Style\u003c\/strong\u003e: Profile Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection Type\u003c\/strong\u003e: Shank\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeldon Flat\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish \/ Coating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Steel, Stainless Steel, Cast Iron, Non-Ferrous Metal, Super Alloys, Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: 80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.7 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: INTERNAL TOOL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 80-1170\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"INTERNAL TOOL","offers":[{"title":"Default Title","offer_id":67912331559218,"sku":"80-1170","price":284.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9a8016f90a872f1ba61f37fa0ed7e081.jpg?v=1791233368","url":"https:\/\/voomisupply.com\/products\/internal-tool-80-1170-convex-radius-cutter-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}