{"product_id":"ingersoll-cutting-tools-6000782-turning-insert-tdj3-tt9080","title":"Ingersoll Cutting Tools 6000782 Turning Insert TDJ3 TT9080","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe INGERSOLL CUTTING TOOLS 6000782 is a solid carbide turning insert in the TDJ series, grade TT9080, designed for grooving and parting operations on CNC lathes and turning centers. The insert features a dual-layer PVD coating of TiAlN and Titanium Nitride for wear resistance and thermal stability at the cutting edge. It carries a 60-degree triangular profile with a 0.008-inch corner radius, a cutting width of 0.118 inches, and an overall length of 0.790 inches. The J chipbreaker geometry controls chip flow during interrupted and continuous grooving cuts. Licensed machinists and CNC operators are the primary installers of this insert type.\u003c\/p\u003e\n\u003cp\u003eThis insert is rated for use on steel, stainless steel, super-alloys, and titanium as primary workpiece materials, with cast iron and hard materials as secondary applications. It is a double-ended insert, allowing both cutting edges to be used before replacement, which improves cost-per-edge efficiency in production turning environments. Typical applications include external and internal grooving, face grooving, and parting on production lathes where consistent tool life and predictable chip control are required. The neutral lead angle and neutral hand make it compatible with straight-shank toolholders designed for the TDJ3 insert seat size.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide substrate with TT9080 grade for high-temperature wear resistance\u003c\/li\u003e\n  \u003cli\u003ePVD-applied TiAlN and Titanium Nitride dual coating for extended tool life\u003c\/li\u003e\n  \u003cli\u003eJ chipbreaker geometry optimized for grooving and parting chip control\u003c\/li\u003e\n  \u003cli\u003eDouble-ended design provides two usable cutting edges per insert\u003c\/li\u003e\n  \u003cli\u003e0.008-inch corner radius suits fine-detail groove profiling\u003c\/li\u003e\n  \u003cli\u003eMaximum depth of cut of 0.748 inches supports deeper parting operations\u003c\/li\u003e\n  \u003cli\u003eNeutral hand and neutral lead angle for use in standard straight toolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement for TDJ series toolholders accepting insert seat size 3. Compatible with clamp-style holding systems. ANSI and ISO designations are both listed as TDJ3, confirming cross-standard fitment in toolholders specifying that insert code.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified CNC machinist or toolroom technician with the machine spindle fully stopped and the machine in a locked-out, energy-isolated state per applicable shop safety procedures. Seat the insert firmly against the toolholder pocket and tighten the clamping screw to the toolholder manufacturer's specified torque  -  do not over-torque, as carbide inserts are brittle and will crack under excess clamping force. Inspect the insert seat and clamp for chips or debris before seating a new insert to ensure full contact and accurate tool-height registration. Replace both cutting edges before the insert body shows edge chipping that could affect workpiece finish or dimensional accuracy.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Series\u003c\/strong\u003e: TDJ\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: TT9080\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiAlN and Titanium Nitride (PVD)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eANSI Code\u003c\/strong\u003e: TDJ3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Code\u003c\/strong\u003e: TDJ3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.118 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Height\u003c\/strong\u003e: 0.185 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.790 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.008 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Depth of Cut\u003c\/strong\u003e: 0.748 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 7 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 0 degrees (Neutral)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: J\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Neutral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel, Stainless Steel, Super-alloys and Titanium\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material\u003c\/strong\u003e: Cast Iron, Hard Material\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Grooving, Parting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ISO\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: INGERSOLL CUTTING TOOLS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 6000782\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"INGERSOLL CUTTING TOOLS","offers":[{"title":"Default Title","offer_id":51973215781170,"sku":"6000782","price":411.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9bc433b22362b82ecc5faea9e47276b0_d90014f8-0877-4b9d-9406-67010ca6cda3.jpg?v=1789972449","url":"https:\/\/voomisupply.com\/products\/ingersoll-cutting-tools-6000782-turning-insert-tdj3-tt9080","provider":"Voomi Supply","version":"1.0","type":"link"}