{"product_id":"ingersoll-cutting-tools-5100209-replaceable-drill-tip-8mm","title":"Ingersoll Cutting Tools 5100209 Replaceable Drill Tip 8mm","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe INGERSOLL CUTTING TOOLS 5100209 is a replaceable drill tip designed for use in modular drilling systems that accept indexable insert-style tips. Built from solid carbide with a TiAlN coating applied via PVD process, this tip delivers consistent performance in steel and other P-class workpiece materials. It carries manufacturer grade IN2005, which corresponds to material grades P15 through P30, making it well suited for a broad range of ferrous cutting applications. The 140-degree included point angle supports clean entry and accurate hole positioning. Installation is accomplished via a clamp-type holding method, fitting seat size 8 drill bodies in the YAB series.\u003c\/p\u003e\n\u003cp\u003eThis tip is intended for use in production drilling environments where replaceable-tip tooling is preferred over regrindable solid drills. It is primarily specified for steel workpieces in both job-shop and high-volume machining operations. The tip is rated for spot drilling applications and features a standard point geometry with a regular helical flute profile. Two flutes are present, and the flute length measures 3.00 mm. Coolant-through capability is not included in this design. Machinists and tooling technicians working with compatible YAB-series drill bodies will find this tip a direct fit for seat size 8 holders.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction in manufacturer grade IN2005 for P15 to P30 material applications\u003c\/li\u003e\n  \u003cli\u003eTiAlN coating via PVD process for improved wear resistance in steel cutting\u003c\/li\u003e\n  \u003cli\u003e140-degree standard point angle optimized for spot drilling and clean hole entry\u003c\/li\u003e\n  \u003cli\u003eRegular helical flute profile with 2 flutes and 3.00 mm flute length\u003c\/li\u003e\n  \u003cli\u003eClamp-type insert holding method compatible with YAB-series seat size 8 drill bodies\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI standards; ISO number NXXF33R02 IN2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with YAB-series modular drill bodies that accept seat size 8 replaceable tips. Compatible with primary workpiece materials classified under ISO P-class (steel). ISO number NXXF33R02 IN2005 may be used as a cross-reference for compatible holders and tooling systems.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or tooling technician using the appropriate torque key or clamp tool specified by the drill body manufacturer. Ensure the drill body seat is clean and free of chips or debris before seating the tip. Always power down and lock out the machine spindle before changing inserts. Follow the drill body manufacturer's clamping procedure to avoid tip damage or misalignment.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Diameter\u003c\/strong\u003e: 8.00 mm (0.3346 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTip Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: IN2005\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: P15 to P30\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiAlN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating Process\u003c\/strong\u003e: PVD\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Helical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.00 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFunctional Length\u003c\/strong\u003e: 0.1000 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\/Projection\u003c\/strong\u003e: 0.1610 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 4.00 mm (0.161 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Seat Size\u003c\/strong\u003e: 8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Geometry\u003c\/strong\u003e: P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: YAB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Clamp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Steel (ISO P-class)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e: Spot Drilling\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eISO Number\u003c\/strong\u003e: NXXF33R02 IN2005\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23242105\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: INGERSOLL CUTTING TOOLS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 5100209\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"INGERSOLL CUTTING TOOLS","offers":[{"title":"Default Title","offer_id":52020149027122,"sku":"5100209","price":255.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cd6780f3ea59de1cc51ae15e07106608.jpg?v=1790011505","url":"https:\/\/voomisupply.com\/products\/ingersoll-cutting-tools-5100209-replaceable-drill-tip-8mm","provider":"Voomi Supply","version":"1.0","type":"link"}