{"product_id":"import-bdna-kp65047-no-6-hss-jobber-drill-bit","title":"Import BDNA-KP65047 No. 6 Hss Jobber Drill Bit","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe IMPORT BDNA-KP65047 is a jobber-length drill bit in No. 6 wire size (0.2040 inches decimal) designed for general-purpose drilling in metal, wood, and plastic. Built from high speed steel with an oxide coating, the bit delivers reliable performance across a wide range of shop and field applications. The 118-degree standard point angle suits most everyday drilling tasks, and the web-thinned tip reduces walking on entry. Right-hand spiral flutes evacuate chips efficiently during operation. At 3.75 inches overall length with a 2.5-inch flute, this is a standard jobber proportion suited for hand-held drills and drill presses alike.\u003c\/p\u003e\u003cp\u003eThis drill bit is intended for general-purpose use in metalworking, fabrication, HVAC rough-in, plumbing, and electrical trade work where a No. 6 wire-gauge hole is required. The straight-cylindrical shank seats securely in standard three-jaw keyless or keyed drill chucks. It is sold individually and is appropriate for both bench work and field drilling in tight framing or panel access situations where a compact jobber-length bit is preferred over a longer aircraft-extension style.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo. 6 wire size — 0.2040-inch decimal diameter for precise wire-gauge hole sizing\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction provides heat resistance during metal drilling\u003c\/li\u003e\n\u003cli\u003eOxide finish reduces friction and provides light corrosion resistance\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle with web-thinned tip for reduced thrust and cleaner entry\u003c\/li\u003e\n\u003cli\u003eRegular spiral flute with tapered web for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank fits standard keyless and keyed drill chucks\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose replacement or stock jobber drill bit for use with any standard drill press or hand drill accepting a straight-cylindrical shank in the 0.2000 to 0.2500 inch diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eSecure the shank fully in the drill chuck before operation and verify the chuck is tightened at all three key positions when using a keyed chuck. Wear appropriate eye protection whenever drilling. For metal substrates, a center punch mark reduces bit walking at startup; cutting fluid is recommended for ferrous materials to extend bit life. Inspect the cutting edges before each use and replace if chipped or dull to avoid oversized holes or workpiece damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: No. 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.2040 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2040 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IMPORT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: BDNA-KP65047\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IMPORT-GENERIC","offers":[{"title":"Default Title","offer_id":51704303026482,"sku":"BDNA-KP65047","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/cbfd8a4cb951d0b6cd3510c63bd254a4.jpg?v=1788421760","url":"https:\/\/voomisupply.com\/products\/import-bdna-kp65047-no-6-hss-jobber-drill-bit","provider":"Voomi Supply","version":"1.0","type":"link"}