{"product_id":"import-27434-jobber-length-drill-bit-12-5-mm-hss","title":"Import 27434 Jobber Length Drill Bit 12.5 Mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe IMPORT 27434 is a jobber-length twist drill bit designed for general-purpose drilling in metal, wood, and plastics. Built from high speed steel with an oxide coating, this bit handles everyday production and maintenance drilling where consistent performance matters. The 118-degree standard point geometry suits a wide range of common materials. At 12.5 mm (0.4921 inches) in diameter with an overall length of 5-63\/64 inches (152 mm), it fits standard drill chucks and magnetic drill press setups used in fabrication and mechanical trade work. The straight-cylindrical shank seats securely in three-jaw chucks without slipping under load.\u003c\/p\u003e\u003cp\u003eThis bit is suited for trade professionals and maintenance technicians working in HVAC, plumbing, electrical, and general mechanical service. Typical applications include drilling clearance holes, pilot holes, and through-holes in mild steel brackets, sheet metal, conduit hangers, and similar structural components. The regular spiral flute promotes chip evacuation during through-drilling, and the web-thinned, tapered web construction reduces feed pressure needed to start the cut. Each package contains one bit. Minimum order quantity is 6 units.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e12.5 mm (0.4921 inches) diameter with a matching straight-cylindrical shank for secure chuck grip\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle suitable for a broad range of common materials\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction with oxide coating for corrosion resistance and reduced friction\u003c\/li\u003e\n\u003cli\u003eWeb-thinned tapered web reduces feed pressure and improves penetration in harder materials\u003c\/li\u003e\n\u003cli\u003eRegular spiral flute promotes chip clearance during through-drilling\u003c\/li\u003e\n\u003cli\u003eRight-hand cut compatible with all standard drill presses, hand drills, and magnetic base drills\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber-length drill bit compatible with any standard three-jaw chuck accepting a 0.4921-inch straight-cylindrical shank, including benchtop drill presses, hand drills, and magnetic base drills commonly used in trade and maintenance applications.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed or qualified trade technician should secure the bit firmly in the chuck before operation and verify chuck key removal prior to starting the drill. Always wear appropriate eye protection when drilling metal or composite materials. Secure the workpiece with a clamp or vise — never hold it freehand. For drilling into harder steels, use cutting fluid to extend bit life and reduce heat buildup at the cutting edge.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 12.5 mm (0.4921 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5-63\/64 inches (152 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4-31\/64 inches (114 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.4921 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IMPORT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 27434\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IMPORT-GENERIC","offers":[{"title":"Default Title","offer_id":51701609169202,"sku":"27434","price":62.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1387a1cbc85e69f037e155e448d18e22_b7aae50c-836d-484d-b8ed-a0282cf349a4.jpg?v=1788402404","url":"https:\/\/voomisupply.com\/products\/import-27434-jobber-length-drill-bit-12-5-mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}