{"product_id":"import-27406-jobber-drill-bit-3-00-mm-hss-oxide","title":"Import 27406 Jobber Drill Bit 3.00 Mm Hss Oxide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe IMPORT 27406 is a general-purpose jobber-length drill bit designed for metal, wood, and plastic drilling applications in light fabrication and maintenance work. Built from high speed steel with an oxide finish, it offers basic heat and corrosion resistance suited for intermittent production use. The bit features an 118-degree standard point angle, a right-hand spiral flute with regular helix, and a straight-cylindrical shank for use in standard drill chucks and drill presses. Overall length is 2-3\/4 inches with a flute length of 1-39\/64 inches. The web is thinned and tapered to reduce entry resistance and improve chip evacuation on breakthrough.\u003c\/p\u003e\u003cp\u003eThis drill bit is used in general shop, field maintenance, HVAC, plumbing rough-in, and light electrical work where a small-diameter pilot or clearance hole is needed. With a diameter of 3.00 mm (0.1181 inches), it falls in the 0.1000 to 0.1500 inch size range and is appropriate wherever metric-sized holes are called out on fabrication drawings or installation specs. Sold individually, it is sized for use in portable drills, drill presses, and bench-mounted equipment. Trade professionals typically keep this size on hand for anchor pilot holes, wire clearance bores, and sheet metal work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3.00 mm (0.1181 inch) diameter for metric hole sizing in fabrication and installation work\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction with oxide coating for basic heat resistance\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle for general-purpose entry on common materials\u003c\/li\u003e\n\u003cli\u003eRight-hand spiral flute with regular helix for consistent chip removal\u003c\/li\u003e\n\u003cli\u003eWeb-thinned, tapered web design reduces cutting resistance at breakthrough\u003c\/li\u003e\n\u003cli\u003eStraight-cylindrical shank fits standard 3-jaw chucks without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose replacement jobber drill bit fitting standard 3-jaw chucks and drill press collets that accept straight-cylindrical shanks in the 0.1181 inch diameter range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstall in a properly sized drill chuck and tighten securely before use. Always wear appropriate eye protection when drilling. Use cutting fluid on ferrous metals to extend bit life and reduce heat buildup. Inspect the bit for chipping or wear before each use and discard bits that show visible damage to the cutting edge.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 3.00 mm (0.1181 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-3\/4 inches (70.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1-39\/64 inches (41.00 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Length\u003c\/strong\u003e: 29.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1181 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular Helix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IMPORT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 27406\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IMPORT-GENERIC","offers":[{"title":"Default Title","offer_id":51700693598514,"sku":"27406","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/bcefb5ea8f43310fbc9f817ec3522c9b.jpg?v=1788393942","url":"https:\/\/voomisupply.com\/products\/import-27406-jobber-drill-bit-3-00-mm-hss-oxide","provider":"Voomi Supply","version":"1.0","type":"link"}