{"product_id":"import-22400-j-jobber-drill-bit-letter-j-hss-oxide","title":"Import -22400-J Jobber Drill Bit Letter J Hss Oxide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe IMPORT -22400-J is a jobber-length drill bit sized to letter J (0.2770 inch decimal equivalent), designed for general-purpose drilling in metal, wood, and plastic. Built from high speed steel with an oxide coating, this bit delivers adequate wear resistance for production and maintenance drilling applications. The 118-degree standard point angle suits a wide range of common materials, and the web-thinned tip reduces thrust and improves center-starting accuracy. Right-hand spiral flutes clear chips efficiently during through-hole drilling. Licensed tradespeople and maintenance technicians working in fabrication, mechanical, or construction settings will find this a reliable stock bit for everyday use.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for general-purpose drilling tasks in residential and commercial maintenance, light fabrication, and mechanical service environments. The jobber-length body (4.125 inches overall) provides the reach needed for most standard through-hole applications without sacrificing rigidity. The straight-cylindrical shank seats directly in standard keyed or keyless drill chucks. It is appropriate for use in handheld drills, drill presses, and similar equipment where a letter-J diameter hole is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eLetter J size — 0.2770 inch decimal equivalent, within the 0.2500 to 0.3000 inch size range\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced thrust and improved starting\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with oxide finish for general-purpose durability\u003c\/li\u003e\n  \u003cli\u003eRegular spiral, right-hand cut flutes for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank (0.2770 inch diameter) fits standard drill chucks\u003c\/li\u003e\n  \u003cli\u003eJobber length — 2.875-inch flute length, 4.125-inch overall length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose jobber-length drill bit compatible with standard keyed and keyless drill chucks accepting a straight-cylindrical shank in the 0.2500 to 0.3000 inch diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the straight shank fully into the drill chuck before operating — ensure the chuck is tightened uniformly. When drilling metal, use appropriate cutting fluid to reduce heat buildup and extend bit life. Inspect the cutting edges before each use and replace the bit if chipping or excessive wear is observed. Follow applicable shop safety practices including eye protection and workpiece clamping.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Letter)\u003c\/strong\u003e: J\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.2770 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2770 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.875 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.125 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IMPORT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: -22400-J\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IMPORT-GENERIC","offers":[{"title":"Default Title","offer_id":51707927757106,"sku":"-22400-J","price":59.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a2d0fb0db8b7851f99568e25abeb8aed.jpg?v=1788442990","url":"https:\/\/voomisupply.com\/products\/import-22400-j-jobber-drill-bit-letter-j-hss-oxide","provider":"Voomi Supply","version":"1.0","type":"link"}