{"product_id":"import-20843-mechanics-drill-bit-0-089-in-hss-split-point","title":"Import 20843 Mechanics Drill Bit 0.089 in Hss Split Point","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe IMPORT 20843 is a mechanics-length high-speed steel drill bit designed for general-purpose drilling in ferrous metals and hard materials. It features a 135-degree split point tip, which reduces walking on contact and requires less feed pressure than a conventional 118-degree point. The straight-cylindrical shank seats cleanly in standard drill chucks. At 0.089 inches in diameter and 2.25 inches overall length, this bit is suited for tight-clearance drilling tasks where a jobber-length bit would be impractical. An oxide coating provides light corrosion resistance during storage and use.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is intended for use in hand drills, drill presses, and similar rotary equipment. It is well matched to applications in carbon steel, cast iron, high alloy steel, high tensile strength alloys, and stainless steel. Mechanics-length bits are commonly used by machinists, millwrights, and maintenance technicians who need shorter, stiffer bits to reduce deflection when drilling in confined areas or into hard stock. The right-hand cutting direction is standard for conventional clockwise-rotation equipment.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e135-degree split point reduces bit walking and lowers required feed pressure\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction handles ferrous metals and high-alloy materials\u003c\/li\u003e\n  \u003cli\u003eMechanics length (2.25 inches OAL) provides greater rigidity than jobber-length bits\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard drill chucks without adapters\u003c\/li\u003e\n  \u003cli\u003eOxide finish adds light surface protection against corrosion\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned construction improves cutting efficiency and chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for general-purpose use in carbon steel, cast iron, high alloy steel, high tensile strength alloys, and stainless steel workpieces using standard right-hand rotary drilling equipment.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall the bit securely in a properly rated drill chuck before operation and verify the shank is fully seated. Use appropriate cutting fluid or coolant when drilling stainless steel or high-alloy materials to extend bit life and prevent work hardening. Wear appropriate eye protection and secure the workpiece before drilling. Inspect the bit for wear or damage before each use and replace if the cutting edges are chipped or the point geometry is degraded.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.089 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral (Regular)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Parallel, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Carbon Steel, Cast Iron, High Alloy Steel, High Tensile Strength Alloy, Stainless Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.01 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: IMPORT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 20843\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"IMPORT-GENERIC","offers":[{"title":"Default Title","offer_id":51723089510706,"sku":"20843","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/d9f7c12527f120043de2e44bd7b7dac6.jpg?v=1788600451","url":"https:\/\/voomisupply.com\/products\/import-20843-mechanics-drill-bit-0-089-in-hss-split-point","provider":"Voomi Supply","version":"1.0","type":"link"}