{"product_id":"hubbell-wiring-device-kellems-hblds3ss-cam-disconnect-switch","title":"Hubbell Wiring Device-kellems HBLDS3SS Cam Disconnect Switch","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HUBBELL WIRING DEVICE-KELLEMS HBLDS3SS is an enclosed, non-fused cam disconnect switch rated for 30 amps at 600 volts AC in a 3-phase, 3-pole configuration. Built with a metal enclosure and an IP66 ingress protection rating, this switch is designed for demanding industrial and commercial environments where moisture, dust, and washdown conditions are a concern. It carries a NEMA 4X rating, making it suitable for corrosive and wet locations. Licensed electricians and industrial maintenance technicians typically specify this switch for motor disconnect applications requiring a robust, watertight enclosure. The unit weighs 5 pounds and fits within a compact footprint for panel or wall mounting.\u003c\/p\u003e\n\u003cp\u003eThis cam disconnect switch is used in 3-phase electrical distribution and motor control applications across commercial, industrial, and heavy-duty residential settings. It is well suited for use as a local disconnect on HVAC equipment, pumps, compressors, and other motor-driven loads operating at up to 600 volts AC. With a 15 horsepower rating at 600 volts on 3-phase service, it covers a broad range of typical motor disconnect scenarios. Installations in food processing, wastewater, and outdoor environments frequently call for the NEMA 4X and IP66 ratings this switch provides.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e30-amp, 600-volt AC rating with 3-phase, 3-pole configuration\u003c\/li\u003e\n  \u003cli\u003eNon-fused design for use with upstream overcurrent protection\u003c\/li\u003e\n  \u003cli\u003eNEMA 4X and IP66 rated metal enclosure resists moisture, dust, and corrosion\u003c\/li\u003e\n  \u003cli\u003e15 horsepower capacity at 600 volts on 3-phase service\u003c\/li\u003e\n  \u003cli\u003eCSA Certified and UL Listed for compliance with applicable electrical standards\u003c\/li\u003e\n  \u003cli\u003eCompact enclosed form factor suited for wall or panel mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style enclosed cam disconnect switch for 3-phase motor and equipment disconnect applications operating at up to 600 volts AC where a NEMA 4X rated enclosure is required.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize and lockout\/tagout the circuit before beginning any wiring work. Verify that upstream overcurrent protection is properly sized for the load, as this switch is non-fused. Ensure the enclosure knockouts and conduit entries are sealed appropriately to maintain the IP66 and NEMA 4X ratings after installation.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmperage\u003c\/strong\u003e: 30 amps\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVoltage\u003c\/strong\u003e: 600 volts AC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Phases\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Poles\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorsepower Rating (3 Phase at 600V)\u003c\/strong\u003e: 15 hp\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFused\u003c\/strong\u003e: Non-Fused\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure Type\u003c\/strong\u003e: Enclosed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNEMA Rating\u003c\/strong\u003e: 4X\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIngress Protection Rating\u003c\/strong\u003e: IP66\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight\u003c\/strong\u003e: 5.12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth\u003c\/strong\u003e: 7.37 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength\u003c\/strong\u003e: 9.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCertifications\u003c\/strong\u003e: CSA Certified, UL Listed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 39122233\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HUBBELL WIRING DEVICE-KELLEMS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: HBLDS3SS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HUBBELL","offers":[{"title":"Default Title","offer_id":51693112820018,"sku":"HBLDS3SS","price":828.16,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/8eae67abe9e9698186aa2a5196899b94.jpg?v=1788307487","url":"https:\/\/voomisupply.com\/products\/hubbell-wiring-device-kellems-hblds3ss-cam-disconnect-switch","provider":"Voomi Supply","version":"1.0","type":"link"}