{"product_id":"hougen-12422-annular-cutter-0-8661-in-hss-weldon","title":"Hougen 12422 Annular Cutter 0.8661 in Hss Weldon","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HOUGEN 12422 is a high speed steel annular cutter designed for fast, clean through-holes in ferrous metal. Unlike twist drills, annular cutters remove only a core of material at the perimeter of the hole, reducing the force and power required at the spindle. The 12422 cuts a 0.8661-inch diameter hole to a depth of 50 millimeters (approximately 1.97 inches). The 3\/4-inch Weldon flat shank with two flats seats securely in compatible magnetic drill press arbors and milling machine holders, preventing slippage under load. The bright, uncoated finish is standard for general-purpose HSS cutters used in mild steel fabrication.\u003c\/p\u003e\u003cp\u003eThis cutter is suited for structural steel fabrication, ironwork, and general metal fabrication shops where clean, burr-minimized holes are required in mild steel and steel plate. It installs in magnetic base drill presses commonly used on job sites and in fabrication bays. The Weldon flat shank design is the industry standard interface for annular cutters, making the 12422 a direct fit in most professional-grade magnetic drill units that accept 3\/4-inch shank tooling.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.8661-inch (22 mm) cutting diameter for precise through-hole sizing\u003c\/li\u003e\n\u003cli\u003e50 mm cutting depth accommodates typical structural steel plate and beam flange thickness\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction provides good wear resistance on mild steel\u003c\/li\u003e\n\u003cli\u003e3\/4-inch Weldon flat shank with 2 flats prevents shank rotation under torque\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish — no coating to chip or delaminate during interrupted cuts\u003c\/li\u003e\n\u003cli\u003eRated for mild steel and general steel material applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with magnetic drill presses and milling machine setups that accept a 3\/4-inch Weldon flat shank annular cutter. Material application is rated for mild steel and steel.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eAnnular cutters of this type are installed and removed by a licensed machinist or metal fabricator using the set screws on the arbor that engage the Weldon flats — confirm all set screws are fully tightened before operation. Always use a pilot pin to center the cutter on the work surface and use cutting oil or an appropriate cutting fluid to extend tool life and improve hole finish. Secure the magnetic drill base fully before starting the cut and verify the workpiece is clamped or otherwise restrained. Inspect the cutter teeth for chipping or wear before each use and replace the cutter if teeth are damaged.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutter Diameter\u003c\/strong\u003e: 0.8661 inches (22 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Depth\u003c\/strong\u003e: 50 mm (approximately 1.97 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/4 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flats\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: Mild Steel, Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.28 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HOUGEN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 12422\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HOUGEN","offers":[{"title":"Default Title","offer_id":51715560636722,"sku":"12422","price":80.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/727334c4526cc791a5ec99c55d7e0ee3.jpg?v=1788515636","url":"https:\/\/voomisupply.com\/products\/hougen-12422-annular-cutter-0-8661-in-hss-weldon","provider":"Voomi Supply","version":"1.0","type":"link"}