{"product_id":"horn-s224040034as66-grooving-insert-solid-carbide","title":"Horn S224040034AS66 Grooving Insert Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HORN S224040034AS66 is a solid carbide grooving insert in the S224 series, designed for external and internal grooving operations on CNC lathes and turning centers. It carries the AS66 manufacturer grade and delivers a cutting width of 0.157 inches with a corner radius of 0.008 inches, making it suitable for precise groove geometry in tight-tolerance applications. The insert is held by screw clamping and features a 5-degree lead angle. It is a dual-hand insert compatible with both left-hand and right-hand toolholders, giving technicians flexibility across different machine setups and orientations.\u003c\/p\u003e\n\u003cp\u003eThis insert is intended for production turning environments where repeatable groove width and clean sidewall finish are required. It is rated for use on cast iron and non-ferrous workpiece materials as primary targets, with additional suitability for steel and stainless or high-temperature alloys as secondary workpiece materials. Typical applications include grooving, parting, and profile turning on small-diameter components. Machinists, CNC operators, and toolroom technicians working with precision turned parts are the primary users of this insert.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance in grooving operations\u003c\/li\u003e\n  \u003cli\u003e0.157 inch cutting width for precise groove dimensioning\u003c\/li\u003e\n  \u003cli\u003e0.008 inch corner radius for controlled groove geometry\u003c\/li\u003e\n  \u003cli\u003eLeft-hand and right-hand compatible  -  fits both toolholder orientations\u003c\/li\u003e\n  \u003cli\u003eScrew-holding mount for secure, repeatable insert positioning\u003c\/li\u003e\n  \u003cli\u003e5-degree lead angle supports chip direction and entry geometry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with HORN S224 series toolholders. Compatible with primary workpiece materials coded K (cast iron) and N (non-ferrous), with secondary compatibility for M (stainless and heat-resistant) and S (superalloys and titanium) material codes. Both left-hand and right-hand S224 series holders are supported.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC tooling technicians. Ensure the machine is powered down and the spindle is locked before indexing or replacing inserts. Use the correct torque driver for the clamping screw to avoid seat damage  -  refer to the HORN S224 toolholder documentation for torque specifications. Inspect the insert pocket for chips or debris before seating the new insert.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: S224\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: AS66\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Width\u003c\/strong\u003e: 0.157 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 0.008 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 0.866 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Hand\u003c\/strong\u003e: Left Hand and Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLead Angle\u003c\/strong\u003e: 5 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material Codes\u003c\/strong\u003e: K, N, P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSecondary Workpiece Material Codes\u003c\/strong\u003e: M, S\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HORN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: S224040034AS66\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HORN","offers":[{"title":"Default Title","offer_id":67912311636274,"sku":"S224040034AS66","price":72.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/9c724b862158ef508ded766f76c87db9.jpg?v=1791232821","url":"https:\/\/voomisupply.com\/products\/horn-s224040034as66-grooving-insert-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}