{"product_id":"hertel-k027758as-straight-flute-tap-m10x1-50-bottoming","title":"Hertel K027758AS Straight Flute Tap M10x1.50 Bottoming","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL K027758AS is a straight flute bottoming tap designed for cutting M10x1.50 Metric Coarse internal threads in through-holes and blind holes where full thread depth close to the bottom is required. Manufactured from high-speed steel (HSS) with a bright, uncoated finish, this tap delivers consistent thread quality in a 6H class of fit with a D6 thread limit. Four straight flutes provide chip clearance and stability during tapping operations. At 2-15\/16 inches overall length, it suits standard machine and hand tapping setups. The bottoming chamfer style allows threading to within a few pitches of the bottom of a blind hole, making it the preferred finishing tap in a two- or three-tap sequence.\u003c\/p\u003e\n\u003cp\u003eThis tap is suited for metalworking applications across manufacturing, maintenance, and repair environments. It is commonly used by machinists, toolmakers, and maintenance technicians working with ferrous and non-ferrous metals where M10x1.50 Metric Coarse threads are specified. The straight flute geometry makes it appropriate for use in materials that produce short, brittle chips such as cast iron, brass, and certain aluminum alloys. It is used as a bottoming finish tap following a taper or plug tap to achieve full thread depth in blind holes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBottoming chamfer style threads to near-bottom of blind holes\u003c\/li\u003e\n  \u003cli\u003eM10x1.50 Metric Coarse thread form, 6H class of fit\u003c\/li\u003e\n  \u003cli\u003eD6 thread limit for precise tolerance control\u003c\/li\u003e\n  \u003cli\u003e4 straight flutes suited for short-chip materials\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction for durability in general-purpose tapping\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish  -  2-15\/16 inches overall length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard M10x1.50 Metric Coarse bottoming tap for use in any tapping setup, machine tapper, or tap wrench that accepts the corresponding shank size. No specific model compatibility was provided in the product data.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist or technician following proper tapping procedures. Ensure the workpiece is securely clamped and the tap is properly aligned with the pre-drilled hole before beginning. Apply an appropriate cutting fluid for the material being tapped to extend tool life and improve thread quality. As a bottoming tap, use it as the final step in a tapping sequence after a taper or plug tap has established the thread form.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M10x1.50\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: Metric Coarse\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Type\u003c\/strong\u003e: Bottoming\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClass of Fit\u003c\/strong\u003e: 6H\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Limit\u003c\/strong\u003e: D6\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Style\u003c\/strong\u003e: Straight\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2-15\/16 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.92 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: K027758AS\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51742796349746,"sku":"K027758AS","price":30.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/f1e18be20f06b1606fb802011b38ae9f.jpg?v=1788839453","url":"https:\/\/voomisupply.com\/products\/hertel-k027758as-straight-flute-tap-m10x1-50-bottoming","provider":"Voomi Supply","version":"1.0","type":"link"}