{"product_id":"hertel-k010457as85-thread-forming-tap-m6x1-bottoming-ticn","title":"Hertel K010457AS85 Thread Forming Tap M6x1 Bottoming Ticn","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL K010457AS85 is a metric bottoming thread forming tap manufactured from high-speed steel with a TiCN (titanium carbonitride) coating. Thread forming taps displace material rather than cutting it, producing stronger threads with no chips to clear — a key advantage in blind hole applications. This tap is sized for M6x1 threads and carries a D8 thread limit for close-tolerance work. With an overall length of 2.5 inches and a thread length of 1 inch, it is well suited for production and maintenance threading in metal components. Installation is performed by machinists and toolroom technicians using standard tapping equipment.\u003c\/p\u003e\n\u003cp\u003eThis tap is intended for blind hole threading in ductile metals where chip evacuation is a concern and thread strength is a priority. The bottoming chamfer — with 1 to 2 chamfered threads — allows threading to the bottom of a blind hole with minimal run-out. The right-hand thread direction is standard for conventional tapping equipment and manual tap handles. The TiCN coating reduces friction and extends tool life in ferrous and non-ferrous materials. Typical applications include threading tapped inserts, machine frames, fixtures, and close-tolerance assemblies in manufacturing and repair environments.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eBottoming chamfer with 1-2 chamfered threads for threading to the bottom of blind holes\u003c\/li\u003e\n  \u003cli\u003eTiCN coating reduces friction and improves wear resistance compared to uncoated HSS\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction suitable for a wide range of ductile metals\u003c\/li\u003e\n  \u003cli\u003eD8 thread limit for close-tolerance metric thread production\u003c\/li\u003e\n  \u003cli\u003eRight-hand thread direction compatible with standard tapping equipment\u003c\/li\u003e\n  \u003cli\u003eNo coolant-through requirement — compatible with surface-applied cutting fluid\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard tapping chucks and tap handles accepting a 0.255-inch shank diameter, producing M6x1 right-hand internal threads in blind hole applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eThis tap is installed by machinists or toolroom technicians using a tapping machine, CNC machining center, or hand tap handle. Ensure the workpiece is securely fixtured and the tap is properly aligned with the drilled pilot hole before engaging. Apply a suitable cutting fluid or tapping compound to the tap before use to reduce friction and heat buildup. Do not force the tap if resistance increases unexpectedly — back off to clear any built-up material and re-engage carefully.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Size\u003c\/strong\u003e: M6x1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Standard\u003c\/strong\u003e: Metric\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfer Type\u003c\/strong\u003e: Bottoming\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChamfered Threads\u003c\/strong\u003e: 1-2P\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Limit\u003c\/strong\u003e: D8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.5 inches (63.50 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThread Length\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.255 inches (6.48 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSquare Size\u003c\/strong\u003e: 0.1929 inches (4.90 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication\u003c\/strong\u003e: Blind Hole Threading\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.07 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: K010457AS85\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51734717628722,"sku":"K010457AS85","price":52.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/1eac843277558f61c09154cd6b1f9d10.jpg?v=1788765841","url":"https:\/\/voomisupply.com\/products\/hertel-k010457as85-thread-forming-tap-m6x1-bottoming-ticn","provider":"Voomi Supply","version":"1.0","type":"link"}