{"product_id":"hertel-h95006221-jobber-drill-bit-letter-v-0-3770-in","title":"Hertel H95006221 Jobber Drill Bit Letter V 0.3770 in","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL H95006221 is a letter-size V jobber drill bit engineered for heavy-duty holemaking in metal and general-purpose materials. Built from high speed steel with an oxide finish, this bit delivers consistent performance in production and maintenance drilling applications. The 137-degree split point geometry reduces walking at entry and lowers thrust requirements compared to conventional 118-degree points. At 0.3770 inches in decimal diameter and 5 inches overall length, this is a standard jobber-length tool suited for drill presses, CNC machines, and hand-held power drills. Two spiral flutes with a regular helix clear chips efficiently during through-hole and blind-hole operations.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is intended for trade and industrial use where repeatable hole quality in the 0.3500 to 0.4000 inch diameter range is required. Typical applications include structural fabrication, HVAC rough-in drilling, plumbing rough-in, electrical conduit layout, and general metalworking. The heavy-duty grade designation makes it appropriate for higher feed rates and interrupted cuts. Right-hand cutting direction is standard for conventional spindle rotation. Three flats on the shank reduce slippage in standard drill chucks.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e137-degree split point reduces bit walking and entry thrust on hard or slick surfaces\u003c\/li\u003e\n  \u003cli\u003eHigh speed steel construction with oxide coating for heat resistance and lubricity\u003c\/li\u003e\n  \u003cli\u003eHeavy-duty grade rated for higher feed rates and interrupted cuts\u003c\/li\u003e\n  \u003cli\u003e2-flute regular spiral design promotes efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eThree flats on shank prevent chuck slippage during high-torque drilling\u003c\/li\u003e\n  \u003cli\u003eConforms to ANSI specification standards for consistent dimensional tolerancing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard jobber-length drill bit compatible with 3-jaw drill chucks and collet systems accepting a straight shank in the 0.3770 inch diameter range, suitable for drill presses, hand drills, and CNC drilling spindles.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall in a properly sized drill chuck and tighten securely using all three chuck key positions to engage the shank flats evenly. Disconnect power or engage the machine lockout before changing bits. Use appropriate cutting fluid or coolant for the workpiece material to extend bit life, even though this tool does not support coolant-through delivery. Confirm spindle speed and feed rate are appropriate for the workpiece material before beginning the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Letter)\u003c\/strong\u003e: V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.3770 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 137 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flats\u003c\/strong\u003e: 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDouble Margin\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Jobber\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpecification Designation\u003c\/strong\u003e: ANSI\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.2 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H95006221\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51730800378162,"sku":"H95006221","price":21.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/3a04e04121f523efeaa3c2ce429db232.jpg?v=1788723054","url":"https:\/\/voomisupply.com\/products\/hertel-h95006221-jobber-drill-bit-letter-v-0-3770-in","provider":"Voomi Supply","version":"1.0","type":"link"}