{"product_id":"hertel-h00323097-boring-insert-tpgt21-51hf2-ht540b-carbide","title":"Hertel H00323097 Boring Insert TPGT21.51HF2 HT540B Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL H00323097 is a solid carbide, uncoated boring insert designed for precision internal turning and boring operations on CNC and manual lathes. It carries the TPGT21.51HF2 insert designation and is manufactured to the HT540B grade, a C1-class uncoated carbide suited for finishing cuts in non-ferrous and cast iron materials. The triangular, 60-degree included angle geometry provides three usable cutting edges. With a 1\/4-inch inscribed circle, a 3\/32-inch thickness, a 1\/64-inch corner radius, and an 11-degree relief angle, this insert delivers tight tolerances and clean surface finishes in small-diameter boring applications. The HF2 chipbreaker geometry promotes efficient chip evacuation during light finishing passes. Licensed machinists and CNC programmers are the primary installers.\u003c\/p\u003e\n\u003cp\u003eThis insert is applied in small-bore internal turning, copy turning, and finish boring where close dimensional control is required. The uncoated solid carbide construction makes it well suited for aluminum, copper alloys, and other non-ferrous workpiece materials where coated grades can cause built-up edge. It is held by screw clamping, making it compatible with boring bars and tool holders designed for TPGT-style inserts with top-clamping or lever-lock screw retention. Minimum order quantity for this insert is 10 pieces; each unit is individually packaged.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid carbide, uncoated construction in C1 material grade for non-ferrous and cast iron finishing\u003c\/li\u003e\n  \u003cli\u003eTPGT triangular geometry with 60-degree included angle provides three usable cutting edges\u003c\/li\u003e\n  \u003cli\u003eHF2 chipbreaker promotes chip control during light, high-precision finishing passes\u003c\/li\u003e\n  \u003cli\u003e1\/64-inch (0.0150-inch) corner radius supports fine surface finish requirements\u003c\/li\u003e\n  \u003cli\u003e11-degree relief angle reduces cutting forces and minimizes workpiece deflection in small bores\u003c\/li\u003e\n  \u003cli\u003eScrew-clamp insert holding method for secure, repeatable edge indexing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in boring bars and tool holders that accept TPGT-style screw-clamp inserts with a 1\/4-inch inscribed circle and 3\/32-inch thickness. Verify holder pocket geometry and screw size against the TPGT21.51 insert specification before installation.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists or CNC tooling technicians. Before indexing or replacing inserts, ensure the machine spindle is fully stopped and locked out per shop lockout\/tagout procedures. Use the correct torque driver or wrench for the clamping screw to avoid cracking the carbide substrate  -  do not overtighten by hand tools alone. Inspect the pocket seat and clamping screw for wear or debris before seating a new insert edge.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Style\u003c\/strong\u003e: TPGT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Size Code\u003c\/strong\u003e: 21.51\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShape\u003c\/strong\u003e: Triangle\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIncluded Angle\u003c\/strong\u003e: 60 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C1\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Grade\u003c\/strong\u003e: HT540B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: HF2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInscribed Circle\u003c\/strong\u003e: 1\/4 inch (0.2500 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThickness\u003c\/strong\u003e: 3\/32 inch (0.0940 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCorner Radius\u003c\/strong\u003e: 1\/64 inch (0.0150 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRelief Angle\u003c\/strong\u003e: 11 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInsert Holding Method\u003c\/strong\u003e: Screw\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1 piece per package\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Order Quantity\u003c\/strong\u003e: 10 pieces\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.03 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: H00323097\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51739595702578,"sku":"H00323097","price":295.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/e8dff715729a3eb4d24fecf125f76d92.jpg?v=1788816718","url":"https:\/\/voomisupply.com\/products\/hertel-h00323097-boring-insert-tpgt21-51hf2-ht540b-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}