{"product_id":"hertel-e899921305-square-end-mill-2-flute-hss-tin","title":"Hertel E899921305 Square End Mill 2 Flute Hss Tin","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL E899921305 is a square end mill designed for milling operations in metal fabrication, tool rooms, and general machining environments. Ground from high speed steel (HSS) and finished with a titanium nitride (TiN) coating, this end mill offers improved wear resistance and surface lubricity compared to uncoated HSS tooling. It features a 0.625-inch cutting diameter, a 1.3125-inch length of cut, and a 3.75-inch overall length. The 2-flute geometry and 30-degree spiral helix support efficient chip evacuation in a range of materials. Centercutting capability allows direct plunge entry without a pre-drilled hole. This tool is typically installed and operated by machinists, tool-and-die makers, and CNC setup technicians.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for slotting, profiling, and plunging operations on ferrous and non-ferrous materials in both manual and CNC milling applications. The 0.625-inch shank diameter fits standard ER collet chucks, end mill holders, and Weldon-style holders commonly found in vertical machining centers and knee mills. The right-hand cut and right-hand flute configuration is consistent with conventional spindle rotation on standard milling equipment. The 2-flute design is particularly effective in softer materials and slotting applications where chip clearance is a priority.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh speed steel construction provides toughness and regrindability\u003c\/li\u003e\n  \u003cli\u003eTitanium nitride (TiN) coating increases surface hardness and reduces friction at the cutting edge\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes smooth cutting action and efficient chip flow\u003c\/li\u003e\n  \u003cli\u003eCentercutting design allows plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut and right-hand flute for use with standard milling spindle rotation\u003c\/li\u003e\n  \u003cli\u003e2-flute geometry maximizes chip clearance in slotting and full-width cuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as an OEM-style replacement or direct-use HSS square end mill for standard 0.625-inch end mill holders, ER collet systems, and Weldon-style tool holders used in vertical milling centers and manual knee mills.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist familiar with cutting tool setup and machine tool operation. Ensure the machine spindle is fully stopped and locked out before changing tooling. Secure the shank to the recommended minimum insertion depth per the toolholder manufacturer specification to prevent pullout under cutting loads. Verify spindle rotation direction matches the right-hand cut orientation of this tool before engaging the workpiece.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.3125 inches (1-5\/16 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.75 inches (3-3\/4 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches (5\/8 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Titanium Nitride (TiN)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChipbreaker\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: E899921305\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51736118165810,"sku":"E899921305","price":79.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2388c2d08f009c90cb7af5e89155a9e6_000e9d17-5260-4702-9e01-9699200254a1.jpg?v=1788775981","url":"https:\/\/voomisupply.com\/products\/hertel-e899921305-square-end-mill-2-flute-hss-tin","provider":"Voomi Supply","version":"1.0","type":"link"}