{"product_id":"hertel-e699924407-ball-end-mill-0-0625-in-4-flute-carbide","title":"Hertel E699924407 Ball End Mill 0.0625 in 4 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL E699924407 is a solid carbide ball end mill designed for precision milling operations in metalworking and machining environments. With a 0.0625 inch (1\/16 inch) cutting diameter and a 0.1875 inch (3\/16 inch) length of cut, this tool is suited for small-radius profiling, slotting, and contouring in tight geometries. The four-flute configuration improves chip evacuation and surface finish compared to two-flute designs. A TiN coating increases surface hardness and extends tool life in ferrous and non-ferrous materials. This end mill is installed and used by machinists, tool-and-die makers, and CNC operators working on precision components.\u003c\/p\u003e\u003cp\u003eThis end mill is well suited for CNC machining centers and manual milling machines where fine detail work is required. The double-end configuration provides two usable cutting ends, improving cost-per-edge value. With a 1\/8 inch shank diameter and 1.5 inch overall length, it fits standard collet systems and tool holders commonly found in production and job-shop environments. Right-hand cutting and right-hand flute direction make it compatible with conventional spindle setups.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e0.0625 inch ball cutting diameter for small-radius and fine-detail milling\u003c\/li\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance\u003c\/li\u003e\n\u003cli\u003eTiN coating extends tool life and reduces friction at the cutting edge\u003c\/li\u003e\n\u003cli\u003e4-flute design improves surface finish and chip removal efficiency\u003c\/li\u003e\n\u003cli\u003eDouble-end configuration delivers two cutting ends per tool\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand helix for use with standard CNC spindle direction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 1\/8 inch collets and tool holders on CNC machining centers and manual knee mills. No specific machine or system compatibility was stated in the product data.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or CNC operator following standard tooling setup procedures. Ensure the spindle is fully stopped and the machine is powered down before changing tooling. Secure the shank firmly in a clean, properly sized collet or tool holder to the manufacturer-recommended clamping method to prevent runout. Inspect the cutting edges before use and replace the tool if chipping or coating wear is observed.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0625 inches (1\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.1875 inches (3\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.125 inches (1\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: TiN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle or Double End\u003c\/strong\u003e: Double End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: E699924407\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51740699623730,"sku":"E699924407","price":91.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/c53c659c2324488c8a5ddebf74151ab6.jpg?v=1788826812","url":"https:\/\/voomisupply.com\/products\/hertel-e699924407-ball-end-mill-0-0625-in-4-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}