{"product_id":"hertel-e5022002-square-end-mill-1-32-inch-2-flute-carbide","title":"Hertel E5022002 Square End Mill 1\/32 Inch 2 Flute Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL E5022002 is a solid carbide square end mill designed for precision milling in tight geometries and small-feature work. With a 0.0313-inch (1\/32 inch) cutting diameter and a 1\/16-inch length of cut, this tool is built for fine detail passes in ferrous and non-ferrous materials. The 30-degree spiral helix and two-flute geometry promote efficient chip evacuation and reduce cutting forces at small diameters. The uncoated carbide construction makes it suitable for applications where sharp edge retention and substrate integrity are priorities. Licensed machinists and toolroom technicians are the primary users of this end mill.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for CNC machining centers and manual mills performing slotting, profiling, and plunging operations on small features. The 1\/8-inch shank diameter allows fitment in standard collets and tool holders common to benchtop and full-size machining equipment. The centercutting design enables direct plunge entry without a pre-drilled pilot hole. Applications include mold and die work, prototype machining, and precision part production where small-diameter tooling is required.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e0.0313-inch (1\/32 inch) cutting diameter for fine detail and small-feature milling\u003c\/li\u003e\n  \u003cli\u003eSolid carbide construction for rigidity and wear resistance at small diameters\u003c\/li\u003e\n  \u003cli\u003e30-degree helix spiral flute promotes chip clearance and reduces deflection\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge milling without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut with two flutes for balanced cutting forces\u003c\/li\u003e\n  \u003cli\u003eUncoated finish preserves sharp cutting edge geometry out of the box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard-geometry square end mill compatible with 1\/8-inch collets and tool holders on CNC machining centers and manual milling machines.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation should be performed by a qualified machinist following standard tooling setup procedures. Ensure the spindle is fully powered down and locked before changing tooling. Seat the 1\/8-inch shank fully into the collet and torque the collet nut to the holder manufacturer specification. Confirm runout with a dial indicator before beginning a production cut, particularly at this diameter where runout has an outsized effect on tool life and surface finish.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.0313 inches (1\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.0625 inches (1\/16 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1250 inches (1\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.5 inches (1-1\/2 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.02 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: E5022002\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51747101737266,"sku":"E5022002","price":30.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/914f3493f6a187f99bc14f43eb5326e9.jpg?v=1788876083","url":"https:\/\/voomisupply.com\/products\/hertel-e5022002-square-end-mill-1-32-inch-2-flute-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}