{"product_id":"hertel-e2080064-square-end-mill-1-in-2-flute-cobalt","title":"Hertel E2080064 Square End Mill 1 in 2 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL E2080064 is a cobalt square end mill designed for milling ferrous and hard materials in machining applications. Built from M42 cobalt high-speed steel, it delivers heat resistance and edge retention in demanding cuts. The tool features a 1-inch milling diameter, a 3-inch length of cut, and a 5.5-inch overall length, making it a long-length configuration suited for deeper reaching operations. The 30-degree helix angle promotes smooth chip evacuation, and the centercutting design allows the tool to plunge directly into a workpiece. Machinists and tool-and-die professionals are the primary users of this end mill.\u003c\/p\u003e\n\u003cp\u003eThis end mill is suited for general milling, slotting, and profiling operations on steel, stainless steel, and other ferrous alloys in job shop and production environments. The long-length design addresses applications where standard-length tools cannot reach the required depth of cut. The 1-inch shank diameter matches the milling diameter for straightforward clamping in standard end mill holders or collet chucks. Right-hand cutting and right-hand flute direction are standard for conventional mill spindle rotation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt high-speed steel construction for heat and wear resistance in hard-material cuts\u003c\/li\u003e\n  \u003cli\u003e1-inch milling diameter with a matching 1-inch shank diameter\u003c\/li\u003e\n  \u003cli\u003e3-inch length of cut in a long-length configuration for deep-reach operations\u003c\/li\u003e\n  \u003cli\u003e30-degree helix angle promotes efficient chip flow and reduced cutting forces\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry without a pilot hole\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish; right-hand cut, right-hand spiral flutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-fit replacement or standard selection for machining centers and manual mills accepting a 1-inch shank end mill holder or collet. No specific OEM model compatibility was stated in the product data.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by qualified machinists following shop safety procedures. Secure the 1-inch shank in a properly sized end mill holder or collet chuck and verify runout before cutting. Ensure the spindle and machine table are powered down and locked before tool changes. Follow the machine tool manufacturer guidelines for feed rate, speed, and depth of cut when using cobalt tooling on specific workpiece materials.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 5.5 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.915 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: E2080064\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51732912013618,"sku":"E2080064","price":161.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/afc1cb623bffcc8d78e873a97b95618b.jpg?v=1788748792","url":"https:\/\/voomisupply.com\/products\/hertel-e2080064-square-end-mill-1-in-2-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}