{"product_id":"hertel-e2051024-square-end-mill-3-8-in-4-flute-cobalt","title":"Hertel E2051024 Square End Mill 3\/8 in 4 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL E2051024 is a cobalt square end mill designed for metal removal in milling operations across a range of ferrous and non-ferrous materials. It measures 0.375 inches in diameter with a 0.75-inch length of cut and a 3.5-inch overall length. The double-end configuration provides two usable cutting ends, extending tool life between replacements. Four spiral flutes at a 30-degree helix angle promote chip evacuation and smooth cutting action. Constructed from M42 cobalt high-speed steel, this tool offers good heat and wear resistance without a coating, making it well-suited for applications where uncoated tooling is preferred or required.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use in manual mills, knee mills, and CNC machining centers where a 0.375-inch shank is compatible with the spindle or collet system. The right-hand cut and right-hand flute configuration is standard for conventional and climb milling passes on steel, stainless, cast iron, and similar workpiece materials. The regular-length geometry suits general-purpose side milling, slotting, and profiling work. This tool is not centercutting and should not be used for direct plunge entry into solid material.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt HSS construction provides elevated heat resistance compared to standard M2 tooling\u003c\/li\u003e\n\u003cli\u003eDouble-end design delivers two cutting ends per tool, reducing per-edge cost\u003c\/li\u003e\n\u003cli\u003e30-degree helix spiral flute promotes efficient chip flow and reduces cutting forces\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute configuration for standard milling setups\u003c\/li\u003e\n\u003cli\u003eUncoated finish suits applications where coating adhesion or contamination is a concern\u003c\/li\u003e\n\u003cli\u003eNot centercutting — suited for peripheral milling, slotting, and profiling, not plunge entry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or standard tooling selection for machines accepting a 0.375-inch straight shank end mill via collet, end mill holder, or equivalent workholding.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or tooling technician. Secure the shank fully within the collet or tool holder to the recommended engagement depth before tightening. Power down and lock out the spindle drive before changing tooling. Verify runout with a dial indicator after installation and before initiating a cut to avoid premature tool wear or workpiece damage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 0.75 inches (3\/4 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.375 inches (3\/8 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Configuration\u003c\/strong\u003e: Double End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.504 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: E2051024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51744754598194,"sku":"E2051024","price":40.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/18d0deb479439b2887d007dac730ae43.jpg?v=1788860243","url":"https:\/\/voomisupply.com\/products\/hertel-e2051024-square-end-mill-3-8-in-4-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}