{"product_id":"hertel-e2041028-square-end-mill-7-16-in-4-flute-cobalt","title":"Hertel E2041028 Square End Mill 7\/16 in 4 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL E2041028 is a cobalt square end mill designed for milling ferrous and difficult-to-machine materials in machining centers and manual mills. Built from M42 cobalt high-speed steel, it delivers heat resistance and edge retention under demanding cutting conditions. The 7\/16 inch (0.4375 inch) mill diameter pairs with a 1\/2 inch shank, and the 2-3\/4 inch length of cut accommodates deep slot and profile work. Four spiral flutes with a 30-degree helix angle promote efficient chip evacuation and smooth cutting action. The uncoated finish suits applications where regrinding is common. This tool is installed by machinists and toolroom technicians in production and job-shop environments.\u003c\/p\u003e\n\u003cp\u003eThe E2041028 is suited for slotting, peripheral milling, and profiling operations in ferrous metals, stainless steels, and high-temperature alloys where cobalt tooling is preferred over standard HSS. Its extra-long length-of-cut category and 4-3\/4 inch overall length make it practical for reaching deeper features or stepped cavities that standard-length end mills cannot access. The centercutting geometry allows plunge entry as well as conventional side milling, adding operational flexibility on manual or CNC equipment. Right-hand cut and right-hand flute orientation is standard for conventional spindle rotation.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eM42 cobalt high-speed steel construction for improved heat and wear resistance\u003c\/li\u003e\n  \u003cli\u003e7\/16 inch (0.4375 inch) diameter with 1\/2 inch shank for rigid tool holding\u003c\/li\u003e\n  \u003cli\u003e2-3\/4 inch length of cut for deep slotting and profiling\u003c\/li\u003e\n  \u003cli\u003e4 spiral flutes at 30-degree helix angle for efficient chip evacuation\u003c\/li\u003e\n  \u003cli\u003eCentercutting geometry allows direct plunge entry\u003c\/li\u003e\n  \u003cli\u003eExtra-long classification with 4-3\/4 inch overall length for extended reach applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard square end mill for use in any milling machine or machining center accepting a 1\/2 inch straight shank via collet, end mill holder, or set-screw adapter.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation is performed by a machinist or toolroom technician. Secure the 1\/2 inch shank in a properly sized collet or end mill holder and confirm runout before cutting. Ensure the spindle is fully stopped and the machine is powered down or in E-stop before changing tooling. Avoid excessive overhang beyond the length of cut to minimize deflection and chatter, particularly given the extra-long overall length.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 7\/16 inch (0.4375 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2-3\/4 inch (2.75 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch (0.5000 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4-3\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt (M42 HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Extra Long\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.504 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: E2041028\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51733195030834,"sku":"E2041028","price":116.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/afb3b70abd8b4c3041b1e72f326a06d7.jpg?v=1788752623","url":"https:\/\/voomisupply.com\/products\/hertel-e2041028-square-end-mill-7-16-in-4-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}