{"product_id":"hertel-e1032914-square-end-mill-2in-8-flute-hss","title":"Hertel E1032914 Square End Mill 2in 8 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL E1032914 is a single-end square end mill designed for milling flat surfaces, slots, and shoulders in metalworking applications. Built from M7 high speed steel, it delivers consistent cutting performance in ferrous and non-ferrous materials without a coating. The 2-inch cutting diameter is paired with a 2-inch length of cut and an 8-flute configuration, allowing higher feed rates and improved surface finish compared to lower flute-count tools. A 30-degree helix angle promotes smooth chip evacuation and reduces chatter during operation. This tool is installed and operated by machinists and toolroom professionals working on manual or CNC milling machines.\u003c\/p\u003e\u003cp\u003eThis end mill suits production and jobshop environments requiring a large-diameter HSS tool for conventional or climb milling. The right-hand cut and right-hand spiral flute orientation make it compatible with standard spindle rotation on vertical and horizontal milling machines. The 1.25-inch shank diameter and 4.5-inch overall length position it for use in standard R8, CAT, or direct-mount toolholders capable of accepting a 1-1\/4-inch shank. It is a non-center-cutting tool, meaning plunge cuts are not recommended without pre-drilled entry points.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2-inch cutting diameter with 2-inch length of cut for deep slot and shoulder milling\u003c\/li\u003e\n\u003cli\u003e8-flute geometry supports higher feed rates and improved finish on full-width cuts\u003c\/li\u003e\n\u003cli\u003eM7 high speed steel construction provides toughness in interrupted cuts and difficult setups\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes chip flow and reduces cutting forces\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand flute spiral for use with standard spindle rotation\u003c\/li\u003e\n\u003cli\u003eUncoated finish allows easy resharpening and regrinding by toolroom staff\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use end mill for milling machine setups requiring a 1.25-inch shank, 2-inch diameter, 8-flute HSS square end mill in standard toolholders.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed machinist or qualified toolroom operator should install this end mill using a properly sized collet or end mill holder rated for the 1.25-inch shank diameter. Power down and lock out the machine spindle before inserting or removing the tool. Verify runout with a dial indicator after tool installation and before engaging the cut. This tool is not designed for plunge entry; use a pre-drilled hole or ramp entry path when full-depth pocket milling is required.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel (M7)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter Cutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Style\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.13 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: E1032914\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51745805336882,"sku":"E1032914","price":277.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/4fc250fc4a250dae413be957942a23e7.jpg?v=1788865256","url":"https:\/\/voomisupply.com\/products\/hertel-e1032914-square-end-mill-2in-8-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}