{"product_id":"hertel-e1032906-square-end-mill-1-in-6-flute-hss","title":"Hertel E1032906 Square End Mill 1 in 6 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL E1032906 is a single-end, square-profile end mill designed for general-purpose milling operations in ferrous and non-ferrous materials. Ground from M7 high speed steel with a bright, uncoated finish, it delivers consistent performance in slotting, profiling, and peripheral milling applications. The 6-flute geometry provides a higher feed-per-tooth capacity compared to standard 4-flute tooling, making it well suited for finishing passes where surface finish and dimensional accuracy matter. The 30-degree helix angle balances chip evacuation with cutting efficiency across a range of workpiece materials. Overall length is 4 inches with a 5\/8-inch shank diameter for use in standard end mill holders and collet chucks.\u003c\/p\u003e\u003cp\u003eThis end mill is intended for use in manual knee mills, CNC machining centers, and bed mills running at appropriate surface footage for HSS tooling. It is a non-center-cutting design, meaning it is not suited for direct plunging; ramping or helical entry is required for pocket operations. Right-hand cut and right-hand spiral fluting conform to standard spindle and toolholding conventions. The regular length designation makes it appropriate for setups where rigidity and chatter resistance are priorities over extended reach.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM7 high speed steel construction for toughness and wear resistance in general milling applications\u003c\/li\u003e\n\u003cli\u003e6-flute configuration supports higher feed rates and improved surface finish on finishing passes\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip flow and smooth cutting action\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish — compatible with cutting fluids and oils standard for HSS tooling\u003c\/li\u003e\n\u003cli\u003eNon-center-cutting design requires ramp or helical entry for plunge-start pocket milling\u003c\/li\u003e\n\u003cli\u003eRight-hand cut, right-hand spiral — fits standard toolholders without special orientation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or direct-use end mill compatible with standard 5\/8-inch end mill holders, collet chucks, and shrink-fit toolholding systems accepting a 5\/8-inch straight shank.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation should be performed by a qualified machinist or toolroom technician. Ensure the machine spindle is fully stopped and the control is in an e-stop or locked-out state before loading or removing the tool. Seat the shank to the recommended minimum engagement depth in the holder — typically no less than the shank diameter — and torque the set screw or collet nut per the toolholder manufacturer specification. Inspect the shank and flute lands for chips or damage before each use, and verify runout with a dial indicator before beginning a production cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 1 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut (LOC)\u003c\/strong\u003e: 1.875 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length (OAL)\u003c\/strong\u003e: 4 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: M7\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.47 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: E1032906\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51730149638450,"sku":"E1032906","price":101.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/967807edaf46e463176b08af9cfef203.jpg?v=1788712600","url":"https:\/\/voomisupply.com\/products\/hertel-e1032906-square-end-mill-1-in-6-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}