{"product_id":"hertel-e1031032-square-end-mill-0-5in-4-flute-hss","title":"Hertel E1031032 Square End Mill 0.5in 4 Flute Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL E1031032 is a 4-flute square end mill designed for general-purpose milling operations in machine shops, manufacturing facilities, and tool rooms. Built from M7 high speed steel, this end mill delivers reliable cutting performance across a range of ferrous and non-ferrous materials. The 0.5 inch diameter cutting edge pairs with a 0.5 inch shank, making it compatible with standard collet and end mill holders. With a 1.5 inch length of cut and 3.25 inch overall length, it handles moderate-depth slotting, profiling, and peripheral milling tasks. Machinists and CNC operators are the primary users of this tool.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for use on vertical and horizontal milling machines as well as CNC machining centers in both job shop and production environments. The spiral flute geometry and 30-degree helix angle promote chip evacuation and smooth cutting action. Right-hand cut and right-hand flute orientation are standard for conventional milling setups. It is not centercutting, so it is not intended for direct plunge operations. Use cases include shoulder milling, contouring, and slotting where a non-centercutting tool geometry is acceptable.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM7 high speed steel construction provides good toughness and wear resistance for general milling\u003c\/li\u003e\n\u003cli\u003e4-flute design improves surface finish and feed rate capability compared to 2-flute alternatives\u003c\/li\u003e\n\u003cli\u003e30-degree helix angle promotes efficient chip flow during spiral flute cutting\u003c\/li\u003e\n\u003cli\u003eUncoated finish allows for straightforward resharpening and regrinding\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute orientation suits standard milling machine spindle setups\u003c\/li\u003e\n\u003cli\u003e0.5 inch shank diameter fits common collets and end mill holders without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard shank end mill for use in 0.5 inch collets, end mill holders, and milling chucks on vertical mills, horizontal mills, and CNC machining centers that accept right-hand tooling.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified machinists or CNC setup technicians. Power down and lock out the machine spindle before inserting or removing the tool from the holder. Ensure the shank is fully seated and the collet or set screw is torqued to the machine manufacturer specification. This tool is not centercutting and must be ramped or side-entered into the workpiece rather than plunged axially.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: High Speed Steel (M7)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 1.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHelix Angle\u003c\/strong\u003e: 30 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.17 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: E1031032\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51727849193778,"sku":"E1031032","price":48.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6ea1e5319399f1123db8099ac96e90ec.jpg?v=1788683484","url":"https:\/\/voomisupply.com\/products\/hertel-e1031032-square-end-mill-0-5in-4-flute-hss","provider":"Voomi Supply","version":"1.0","type":"link"}