{"product_id":"hertel-c-e96-s13b-cobalt-drill-bit-set-13-pc-aircraft","title":"Hertel C.E96.S13B Cobalt Drill Bit Set 13 Pc Aircraft","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL C.E96.S13B is a 13-piece aircraft extension length drill bit set built for metalworking professionals who need extra reach and reliable performance in tight or deep drilling applications. Made from cobalt steel with a bright uncoated finish, these bits handle hardened metals, stainless, and high-strength alloys without losing edge integrity. The 135-degree split point starts on contact without a center punch, reducing walking on curved or uneven surfaces. With an overall length of 6 inches and sizing that steps up in 1\/64-inch increments from 1\/16 inch to 1\/4 inch, this set covers a practical range for structural, sheet metal, and general fabrication work.\u003c\/p\u003e\n\u003cp\u003eThis set is suited for metalworking and multipurpose drilling tasks in both residential and commercial trade environments. Aircraft extension length geometry gives technicians the clearance needed when working around framing, ductwork, structural steel, or in confined spaces where standard-length bits cannot reach. The heavy-duty rating makes these appropriate for production drilling, maintenance repair, and fabrication shops. Bits are stored in an open metal stand that keeps each size organized and accessible on the bench or in a service vehicle.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCobalt construction resists heat buildup when drilling hardened metals and stainless steel\u003c\/li\u003e\n  \u003cli\u003e135-degree split point eliminates bit walking and reduces the need for a center punch\u003c\/li\u003e\n  \u003cli\u003eAircraft extension length at 6 inches total provides reach in confined or deep-clearance applications\u003c\/li\u003e\n  \u003cli\u003eSize range from 1\/16 inch to 1\/4 inch in 1\/64-inch step increments covers common structural and sheet metal hole sizes\u003c\/li\u003e\n  \u003cli\u003eBright uncoated finish allows visual inspection of the cutting edge for wear\u003c\/li\u003e\n  \u003cli\u003eMetal open stand storage keeps all 13 pieces organized and readily accessible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use with standard 3-jaw drill chucks accepting round shanks in the inch measurement system. Suitable for metalworking and multipurpose drilling applications requiring aircraft extension length geometry.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation of these drill bits is performed by machinists, fabricators, HVAC technicians, electricians, and plumbers who require extended reach during drilling operations. Secure the bit firmly in the chuck and verify it runs true before engaging the workpiece. When drilling metals, use cutting fluid to extend bit life and reduce heat buildup, especially in materials harder than mild steel. Wear appropriate eye protection and secure the workpiece before drilling.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Pieces\u003c\/strong\u003e: 13\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum Drill Bit Size\u003c\/strong\u003e: 1\/16 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum Hole Size\u003c\/strong\u003e: 1\/4 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStep Increments\u003c\/strong\u003e: 1\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSystem of Measurement\u003c\/strong\u003e: Inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Application\u003c\/strong\u003e: Metalworking, Multipurpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: Heavy Duty\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStorage Unit Type\u003c\/strong\u003e: Open Stand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStorage Unit Material\u003c\/strong\u003e: Metal\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 5 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C.E96.S13B\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51730057920818,"sku":"C.E96.S13B","price":238.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/627e6de68645ae37be447a0eec01b3ad.jpg?v=1788710956","url":"https:\/\/voomisupply.com\/products\/hertel-c-e96-s13b-cobalt-drill-bit-set-13-pc-aircraft","provider":"Voomi Supply","version":"1.0","type":"link"}