{"product_id":"hertel-c-e07-0397-aircraft-drill-bit-5-32-in-cobalt","title":"Hertel C.E07.0397 Aircraft Drill Bit 5\/32 in Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL C.E07.0397 is a cobalt aircraft extension drill bit designed for demanding drilling applications in aerospace, sheet metal, and structural fabrication work. It measures 5\/32 inch (0.1563 inch decimal) in diameter with a 12-inch overall length, making it well-suited for deep-reach drilling where standard-length bits cannot access the work area. The 135-degree split point provides self-centering on contact, reducing the need for a center punch on most surfaces. A straw finish indicates the cobalt content and heat treatment that gives this bit its hardness and heat resistance. Machinists, aircraft mechanics, and fabricators working with high-strength alloys rely on this type of bit for consistent performance.\u003c\/p\u003e\u003cp\u003eThis bit is built for drilling hard materials including stainless steel, titanium, and high-strength alloys commonly found in aircraft structural assemblies and precision fabrication. The 12-inch overall length is the defining characteristic of the aircraft extension design, allowing the bit to reach through structural members, deep fixtures, or stacked material that would block a jobber-length bit. The 2-inch spiral flute length efficiently clears chips during drilling. Right-hand cutting direction is standard for conventional drill press and hand drill operation. General-purpose tool performance rating makes it appropriate across a range of ferrous and non-ferrous base materials encountered in aviation and industrial maintenance environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e135-degree split point with self-centering geometry reduces walking on hard or curved surfaces\u003c\/li\u003e\n\u003cli\u003eCobalt tool material with straw finish provides heat and wear resistance in tough alloys\u003c\/li\u003e\n\u003cli\u003e12-inch overall length enables deep-reach access in aircraft and structural applications\u003c\/li\u003e\n\u003cli\u003eWeb-thinned, tapered web configuration reduces thrust and improves chip flow\u003c\/li\u003e\n\u003cli\u003e2-inch spiral flute length with 2-flute design for efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard drill chucks without an adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard aircraft extension drill bit conforming to NAS 907, compatible with conventional straight-shank drill chucks accepting 5\/32-inch diameter tooling.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis bit is installed and used by machinists, aircraft mechanics, and fabricators using standard drill presses, magnetic drills, or hand-held power drills with a compatible chuck. Secure the workpiece firmly before drilling to prevent movement, and apply cutting fluid appropriate for the base material when drilling hard alloys to extend bit life. Inspect the cutting edges before each use and replace the bit if chipping or excessive wear is observed. Follow applicable shop safety standards and wear appropriate eye protection during operation.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5\/32 inch (0.1563 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/32 inch (0.1563 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Centering\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Straw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard\u003c\/strong\u003e: NAS 907\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.06 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C.E07.0397\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51727147237682,"sku":"C.E07.0397","price":30.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/12a05c03939831dd404aa613d61e4923.jpg?v=1788674011","url":"https:\/\/voomisupply.com\/products\/hertel-c-e07-0397-aircraft-drill-bit-5-32-in-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}