{"product_id":"hertel-c-e05-0714-aircraft-extension-drill-bit-9-32-in-hss","title":"Hertel C.E05.0714 Aircraft Extension Drill Bit 9\/32 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL C.E05.0714 is an aircraft extension drill bit engineered for drilling in hard-to-reach areas where standard-length bits fall short. Built from high-speed steel with an oxide finish, it measures 12 inches in overall length and carries a 135-degree split point that self-centers on contact, reducing walking and the need for a center punch. The two-flute spiral design clears chips efficiently during through-drilling operations. With a 9\/32-inch (0.2813-inch decimal) diameter straight cylindrical shank and a web-thinned, tapered web configuration, this bit delivers consistent cutting performance on ferrous and non-ferrous metals in general-purpose applications. It is installed by machinists, aircraft maintenance technicians, and trade professionals working in structural or mechanical assemblies.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is suited for applications requiring extended reach, such as drilling through bulkheads, structural panels, deep cavities, or stacked material assemblies where standard jobber-length bits cannot access the work zone. The 2-15\/16-inch (2.9375-inch decimal) flute length handles the depth demands common in aerospace maintenance, HVAC equipment assembly, sheet metal fabrication, and general mechanical work. Right-hand cutting direction is standard for use in conventional drill presses, magnetic drills, and portable electric or pneumatic hand drills.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e135-degree split point self-centers on contact, eliminating bit walking on smooth surfaces\u003c\/li\u003e\n  \u003cli\u003e12-inch overall length provides extended reach into confined or deep work zones\u003c\/li\u003e\n  \u003cli\u003eHigh-speed steel construction with oxide finish for corrosion resistance and reduced friction\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web reduces thrust force and improves chip evacuation\u003c\/li\u003e\n  \u003cli\u003eTwo-flute spiral geometry with right-hand cutting direction for standard drill compatibility\u003c\/li\u003e\n  \u003cli\u003e9\/32-inch straight cylindrical shank fits standard drill chucks without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned for use in standard three-jaw drill chucks accepting a 9\/32-inch straight cylindrical shank; compatible with drill presses, magnetic drills, and portable pneumatic or electric hand drills used in general-purpose drilling applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eSecure the workpiece firmly before drilling to prevent movement during cutting. Ensure the drill chuck is fully tightened on the straight shank before operating. Apply cutting fluid or lubricant when drilling ferrous metals to extend bit life and maintain cutting edge integrity. Replace the bit if the cutting edges show visible wear, chipping, or if the bit requires excessive feed force to advance.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size\u003c\/strong\u003e: 9\/32 inches (0.2813 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 12 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2-15\/16 inches (2.9375 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 9\/32 inches (0.2813 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelf-Centering\u003c\/strong\u003e: Yes\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.4 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C.E05.0714\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51742624743730,"sku":"C.E05.0714","price":25.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/77b1a5009eedcd8a3105588d13b70e81.jpg?v=1788838426","url":"https:\/\/voomisupply.com\/products\/hertel-c-e05-0714-aircraft-extension-drill-bit-9-32-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}