{"product_id":"hertel-c-e03-0397-aircraft-extension-drill-bit-5-32-in-hss","title":"Hertel C.E03.0397 Aircraft Extension Drill Bit 5\/32 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL C.E03.0397 is a 5\/32 inch diameter aircraft extension drill bit designed for precision drilling in tight or deep-access applications. Built from high-speed steel (HSS) with an oxide finish, it delivers reliable performance in ferrous and non-ferrous materials. The split point geometry (135 degrees) allows self-centering on contact, reducing walking and the need for a center punch. With an overall length of 6 inches and a 2 inch spiral flute, this bit gives tradespeople the reach needed in constrained work areas. It is a general-purpose cutting tool suited to sheet metal, structural framing, and mechanical assemblies common in HVAC, electrical, and plumbing rough-in work.\u003c\/p\u003e\u003cp\u003eThis aircraft extension drill bit is built for situations where standard-length bits cannot reach the work surface. The 6 inch overall length and straight cylindrical shank make it compatible with standard drill chucks. The 2 inch flute length provides adequate chip clearance during drilling. Right-hand cutting direction is standard for use with conventional corded or cordless drills. The tapered web configuration and web-thinned geometry reduce thrust requirements, making it easier to drive through material cleanly without excessive feed pressure.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5\/32 inch (0.1563 inch) diameter with matching straight cylindrical shank for chuck compatibility\u003c\/li\u003e\n\u003cli\u003e135-degree split point is self-centering and reduces bit walking on smooth or curved surfaces\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction withstands heat generated in continuous or production drilling\u003c\/li\u003e\n\u003cli\u003eOxide finish provides light corrosion resistance and reduces friction at the cutting edge\u003c\/li\u003e\n\u003cli\u003e6 inch overall length extends reach into recessed, framed, or paneled work areas\u003c\/li\u003e\n\u003cli\u003e2-flute spiral design promotes efficient chip evacuation during drilling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose aircraft extension drill bit compatible with any standard drill chuck accepting a straight cylindrical shank in 5\/32 inch diameter.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation is performed by qualified tradespeople including electricians, HVAC technicians, and plumbers during rough-in or structural drilling tasks. Secure the shank fully in the drill chuck before use and verify chuck tightness. Always wear appropriate eye protection when drilling. For extended-length bits, reduce feed pressure to minimize deflection and bit breakage, particularly when drilling through hardened or layered materials.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 5\/32 inches (0.1563 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 5\/32 inches (0.1563 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Centering\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.3 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C.E03.0397\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51782739329330,"sku":"C.E03.0397","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a2b5f23d5716bc58883f828ad8f04e78.jpg?v=1789181201","url":"https:\/\/voomisupply.com\/products\/hertel-c-e03-0397-aircraft-extension-drill-bit-5-32-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}