{"product_id":"hertel-c-e03-0226-aircraft-drill-bit-no-43-hss","title":"Hertel C.E03.0226 Aircraft Drill Bit No. 43 Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL C.E03.0226 is a No. 43 wire-size aircraft extension drill bit designed for deep-reach drilling in aerospace and general metalworking applications. Built from high-speed steel with an oxide finish, it features a 135-degree split point that is self-centering and reduces walking at the start of a cut. The 6-inch overall length gives technicians the extended reach needed to access recessed or difficult locations on aircraft structures, frames, and assemblies. Two spiral flutes and a web-thinned, tapered web configuration promote efficient chip evacuation during right-hand cutting operations.\u003c\/p\u003e\u003cp\u003eThis drill bit suits applications where standard-length bits cannot reach. Common install scenarios include aircraft sheet metal work, airframe assembly, and general fabrication where tight clearances or deep bolt-hole patterns require extended tooling. The 0.0890-inch decimal diameter and 1.25-inch flute length make it appropriate for light to medium-duty through-hole drilling in steel, aluminum, and similar materials. It is typically used by aviation maintenance technicians, aerospace fabricators, and experienced machinists working to NAS 907 standards.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo. 43 wire size (0.0890 inches decimal) for precise small-diameter hole work\u003c\/li\u003e\n\u003cli\u003e135-degree split point with self-centering geometry reduces drill walk and start-up pressure\u003c\/li\u003e\n\u003cli\u003e6-inch overall length provides extended reach into recessed or confined areas\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction with oxide finish for wear resistance in general-purpose cutting\u003c\/li\u003e\n\u003cli\u003eWeb-thinned tapered web improves chip flow and reduces feed force\u003c\/li\u003e\n\u003cli\u003eRight-hand spiral flute with straight cylindrical shank for use in standard drill chucks\u003c\/li\u003e\n\u003cli\u003eMeets NAS 907 standards for aircraft drilling applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as an OEM-style replacement or standard tooling option for aircraft extension drilling applications conforming to NAS 907 requirements. Straight cylindrical shank fits standard drill chucks and drill motors accepting 0.0890-inch shank diameters.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eThis drill bit is installed and operated by aviation maintenance technicians, machinists, or qualified fabricators using appropriate pneumatic or electric drill equipment. Ensure the work surface is securely clamped and the drill motor is rated for the shank diameter before operation. Use appropriate cutting fluid or lubricant when drilling ferrous materials to extend bit life and maintain hole quality. Follow applicable NAS, FAA, or facility maintenance procedures when performing aircraft structural drilling.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: No. 43\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal)\u003c\/strong\u003e: 0.0890 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.0890 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Centering\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Performance\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards\u003c\/strong\u003e: NAS 907\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C.E03.0226\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51728418570546,"sku":"C.E03.0226","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/47c55ad632918124c2045e37f4121e29.jpg?v=1788690977","url":"https:\/\/voomisupply.com\/products\/hertel-c-e03-0226-aircraft-drill-bit-no-43-hss","provider":"Voomi Supply","version":"1.0","type":"link"}