{"product_id":"hertel-c-40w-0754-taper-length-drill-bit-0-2969-in-hss","title":"Hertel C.40W.0754 Taper Length Drill Bit 0.2969 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL C.40W.0754 is a taper length twist drill bit ground from high-speed steel (HSS) with a black oxide finish. It carries a 19\/64 inch (0.2969 inch) diameter, a standard 118-degree split point, and a right-hand spiral flute designed to clear chips efficiently during drilling operations. The black oxide coating provides a mild layer of corrosion resistance and reduces friction at the cutting edge. At 6.375 inches overall length with a 4.0 inch flute, this bit offers greater reach than a jobber-length drill while maintaining the rigidity needed for accurate hole placement in metal, wood, and composite materials. Machinists, maintenance technicians, and fabricators are the typical installers.\u003c\/p\u003e\n\u003cp\u003eThis taper length drill is suited for general-purpose hole-making in production machining, maintenance and repair operations (MRO), and fabrication work where a standard jobber bit lacks the reach to clear deep stock or fixture setups. The straight-cylindrical shank accepts standard drill chucks on drill presses, CNC machining centers, and hand-held drills. Web-thinned geometry at the tip reduces thrust requirements and starting load, which is particularly useful when drilling through harder ferrous materials or thick-gauge steel plate.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e19\/64 inch (0.2969 inch) diameter with matching straight-cylindrical shank for secure chuck retention\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web thinning to reduce entry thrust and improve centering\u003c\/li\u003e\n  \u003cli\u003e4.0 inch spiral flute length provides extended reach beyond standard jobber-length drills\u003c\/li\u003e\n  \u003cli\u003eRight-hand cut, regular spiral flute for efficient chip evacuation in through-hole and blind-hole applications\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish reduces friction and offers light corrosion resistance during storage and use\u003c\/li\u003e\n  \u003cli\u003eHSS construction balances toughness and wear resistance across a wide range of workpiece materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a general-purpose taper length drill bit compatible with any standard drill chuck sized to accept a 19\/64 inch straight-cylindrical shank, including drill presses, hand drills, and CNC spindles.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstall in a properly sized drill chuck and tighten securely before operation. Use appropriate cutting fluid or lubricant when drilling ferrous metals to extend edge life and prevent work hardening. Always secure the workpiece with a vise or clamp before drilling. Wear appropriate PPE including eye protection in accordance with applicable shop safety standards.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 19\/64 inch (0.2969 inches)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6.375 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 4.0 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Black Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 19\/64 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.7 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C.40W.0754\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51730617598258,"sku":"C.40W.0754","price":22.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/57a42eee87787c2dcee7f76d9d1e377b.jpg?v=1788720379","url":"https:\/\/voomisupply.com\/products\/hertel-c-40w-0754-taper-length-drill-bit-0-2969-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}