{"product_id":"hertel-c-40w-0556-taper-length-drill-0-2188-in-hss","title":"Hertel C.40W.0556 Taper Length Drill 0.2188 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL C.40W.0556 is a taper length twist drill bit designed for precision hole-making in metal, ferrous alloys, and general shop materials. Ground from high-speed steel (HSS) with a black oxide finish, it measures 0.2188 inches (7\/32 inch) in diameter with a 118-degree standard point angle and a 6-inch overall length. The web-thinned, tapered web configuration reduces thrust at entry and improves chip clearance during the cut. Right-hand spiral flutes evacuate chips efficiently through a 3.625-inch flute length. This bit is suited to drill press, manual mill, and hand-drill applications where a longer reach than a jobber-length drill is required.\u003c\/p\u003e\n\u003cp\u003eTaper length drills fill the gap between jobber-length and aircraft-extension bits. The C.40W.0556 is well suited to applications that require drilling deeper into workpieces or reaching past fixtures without resorting to an extension. Typical use cases include fabrication shops, maintenance and repair operations, and light machine shops working in mild steel, cast iron, aluminum, and similar materials. The straight-cylindrical shank accepts standard drill chucks. No coolant-through capability is present, so flood or mist cooling applied externally is the standard approach when drilling harder materials.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e7\/32 inch (0.2188 inches) diameter with matched straight-cylindrical shank for secure chuck grip\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle with web-thinned, tapered web for reduced entry thrust\u003c\/li\u003e\n  \u003cli\u003eHSS construction provides good toughness across a wide range of common shop materials\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish offers mild lubricity and corrosion resistance during storage and use\u003c\/li\u003e\n  \u003cli\u003eRegular spiral, right-hand cut flutes over 3.625 inches for positive chip ejection\u003c\/li\u003e\n  \u003cli\u003e6-inch overall length gives extra reach compared to standard jobber-length drill bits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a standard taper length drill bit compatible with any drill press, milling machine, or hand drill fitted with a chuck that accepts a straight-cylindrical shank in the 7\/32 inch diameter range.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or maintenance technicians familiar with rotating tool safety. Secure the shank fully in the chuck and verify runout before drilling. Power down and lock out the machine before changing bits or clearing chip jams. Do not exceed the recommended speed and feed for the workpiece material, and apply external cutting fluid when drilling ferrous materials to extend tool life and maintain hole quality.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Diameter\u003c\/strong\u003e: 0.2188 inches (7\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3.625 inches (3-5\/8 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Black Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.2188 inches (7\/32 inch)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.6 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C.40W.0556\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51750684426546,"sku":"C.40W.0556","price":19.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/2455acc808e7129cc913c773ccd93ca8.jpg?v=1788918394","url":"https:\/\/voomisupply.com\/products\/hertel-c-40w-0556-taper-length-drill-0-2188-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}