{"product_id":"hertel-c-40w-0238-taper-length-drill-3-32-in-hss","title":"Hertel C.40W.0238 Taper Length Drill 3\/32 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL C.40W.0238 is a taper length twist drill bit machined from high-speed steel (HSS) with a black oxide finish. It carries a 3\/32 inch (0.0938 inch) diameter, a standard 118-degree split point, and an overall length of 4.25 inches. The taper length body provides more reach than a jobber-length bit without sacrificing rigidity, making it well suited for drilling through thin stock, sheet metal, and structural steel where a standard-length bit falls short. The black oxide surface finish reduces friction and provides light corrosion resistance during service. This bit is sold individually and is intended for professional machining and fabrication environments.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is used in general metalworking, fabrication shops, maintenance and repair operations, and light manufacturing. Its straight-cylindrical shank seats in standard three-jaw drill chucks on benchtop drill presses, CNC drilling centers, and handheld power drills. The right-hand spiral flute geometry and web-thinned point are appropriate for drilling mild steel, aluminum, brass, cast iron, and similar materials. The 2.25-inch flute length supports chip evacuation in moderate-depth holes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eHSS construction provides toughness and heat resistance for drilling ferrous and non-ferrous metals\u003c\/li\u003e\n  \u003cli\u003eBlack oxide finish reduces friction and offers light corrosion resistance\u003c\/li\u003e\n  \u003cli\u003e118-degree standard point angle suits a wide range of common metal and plastic materials\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned, tapered web configuration reduces thrust and improves point penetration\u003c\/li\u003e\n  \u003cli\u003eTaper length body gives added reach compared to jobber-length equivalents of the same diameter\u003c\/li\u003e\n  \u003cli\u003eStraight-cylindrical shank fits standard drill chucks without adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a taper length replacement drill bit for use in standard three-jaw drill chucks accepting a 3\/32 inch straight shank, suitable for drill presses, CNC drilling equipment, and portable power drills in metalworking and fabrication applications.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstalled by machinists, tool-and-die professionals, and maintenance technicians. Secure the shank fully into the chuck and confirm it is centered before applying power. Always wear appropriate eye protection and secure the workpiece firmly before drilling. Do not exceed the recommended RPM range for the material and bit diameter being used.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (Fractional)\u003c\/strong\u003e: 3\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (Decimal)\u003c\/strong\u003e: 0.0938 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 4.25 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 3\/32 inch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel (HSS)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Black Oxide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Regular Spiral\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241600\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C.40W.0238\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51732617625906,"sku":"C.40W.0238","price":87.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/7cd094125f769e7c8039991df85debb8.jpg?v=1788745074","url":"https:\/\/voomisupply.com\/products\/hertel-c-40w-0238-taper-length-drill-3-32-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}