{"product_id":"hertel-c-402-0205-jobber-drill-bit-2-05-mm-hss","title":"Hertel C.402.0205 Jobber Drill Bit 2.05 Mm Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL C.402.0205 is a high speed steel jobber-length drill bit designed for general-purpose drilling in metal, wood, and plastic. It features a 118-degree standard point angle for reliable center-starting and clean entry, and an oxide coating that reduces friction and helps extend tool life in production drilling environments. The straight cylindrical shank is compatible with standard drill chucks and CNC toolholders. At 2.05 mm in diameter and 54 mm overall length, this drill is suited for precision small-diameter work in light manufacturing, maintenance, and fabrication applications. It is typically installed and used by machinists, tool-and-die technicians, and general maintenance professionals.\u003c\/p\u003e\u003cp\u003eThis drill bit is sized at 2.05 mm (0.0807 inches decimal equivalent), placing it within the 2.00 mm to 3.00 mm size range. It is well-suited for pilot holes, through-holes, and spotting operations on light-gauge ferrous and non-ferrous stock. The right-hand spiral flute geometry provides efficient chip evacuation during drilling. This bit ships individually and is available in multiples of 12, making it practical for shop restocking and toolcrib replenishment.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e118-degree standard point angle for self-centering entry and consistent hole location\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction provides hardness and wear resistance for general-purpose metal drilling\u003c\/li\u003e\n\u003cli\u003eOxide coating reduces surface friction and helps resist heat buildup during operation\u003c\/li\u003e\n\u003cli\u003eRight-hand spiral flute design promotes active chip evacuation from the bore\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank fits standard drill chucks and collet holders without modification\u003c\/li\u003e\n\u003cli\u003eNo coolant-through requirement simplifies setup for bench drilling and handheld operations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a general-purpose jobber drill for use in standard drill presses, CNC machining centers, and handheld drill drivers equipped with a chuck compatible with a straight cylindrical shank in the 2.00 mm to 3.00 mm size range.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed machinist or qualified maintenance technician should secure this bit in a properly rated drill chuck before use. Ensure the chuck key is removed and the spindle is at a full stop before changing tooling. Follow facility safety protocols and applicable OSHA machine guarding requirements when operating drill presses or CNC equipment. Do not exceed the recommended feed and speed parameters for the workpiece material to avoid premature tool wear or breakage.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 2.05 mm (0.0807 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 54 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 29 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight-Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Grade\u003c\/strong\u003e: General Purpose\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Weight\u003c\/strong\u003e: 0.08 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: C.402.0205\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51740697067826,"sku":"C.402.0205","price":42.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/a86e70c8da8fcfac52571241b50ef300_08e65e5a-4355-4903-b13b-6a95acb9ec0f.jpg?v=1788826791","url":"https:\/\/voomisupply.com\/products\/hertel-c-402-0205-jobber-drill-bit-2-05-mm-hss","provider":"Voomi Supply","version":"1.0","type":"link"}