{"product_id":"hertel-95000409-jobber-drill-bit-0-1406-in-hss-135-deg","title":"Hertel 95000409 Jobber Drill Bit 0.1406 in Hss 135 Deg","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 95000409 is a jobber-length drill bit designed for general-purpose holemaking in metal, wood, and similar materials. It measures 0.1406 inches (9\/64 inch) in diameter with an overall length of 3.5 inches and a flute length of 1.75 inches. The bit is manufactured from high speed steel (HSS) with a bright, uncoated finish. The 135-degree split-point angle reduces walking on entry and requires less thrust than a standard 118-degree point. This is a two-flute, spiral-flute design with a regular helix. Machinists, maintenance technicians, HVAC installers, electricians, and plumbers commonly use jobber-length bits for layout drilling and field fabrication work.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for production and maintenance holemaking across residential and light commercial job sites. Its 9\/64-inch diameter makes it a common choice for pilot holes, sheet metal work, and light structural drilling. The jobber-length series falls within the 0.1000 to 0.1500 inch decimal inch size range, covering standard fractional layout requirements. It is sold individually and is appropriate wherever a reliable, general-purpose HSS drill bit is needed without specialty coatings or coolant-through capability.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e9\/64 inch (0.1406 inches) diameter for common pilot and through-hole applications\u003c\/li\u003e\n\u003cli\u003e135-degree point angle reduces bit walking and lowers entry thrust requirements\u003c\/li\u003e\n\u003cli\u003eHigh speed steel construction handles a broad range of workpiece materials\u003c\/li\u003e\n\u003cli\u003eBright, uncoated finish — no coating buildup to affect hole tolerances\u003c\/li\u003e\n\u003cli\u003eJobber-length (3.5 inches overall) provides reach for most standard drilling tasks\u003c\/li\u003e\n\u003cli\u003eTwo-flute regular spiral design promotes efficient chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard jobber-length drill bit compatible with any 3-jaw or keyed drill chuck accepting a straight shank in the 9\/64-inch diameter range, including handheld drills, drill presses, and CNC drilling setups.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed machinist or qualified tradesperson should secure the bit fully in the chuck before operation and verify chuck key removal prior to starting the drill. Always use appropriate work-holding and eye protection per shop safety standards. For ferrous metals, a cutting fluid or lubricant is recommended to extend tool life. Disconnect power to any drilling equipment before changing bits.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 0.1406 inches (9\/64 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 3.5 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 1.75 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral, Regular Helix\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e: High Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright, Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Margin\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeries\u003c\/strong\u003e: Jobber Length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.022 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241634\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 95000409\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51732508508466,"sku":"95000409","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/ca18484814a4cb3e36edcb40d33134b1_f1409bd8-5bf5-4909-8939-8c925b6b350d.jpg?v=1788743764","url":"https:\/\/voomisupply.com\/products\/hertel-95000409-jobber-drill-bit-0-1406-in-hss-135-deg","provider":"Voomi Supply","version":"1.0","type":"link"}