{"product_id":"hertel-91196774-roughing-end-mill-16mm-4-flute-cobalt","title":"Hertel 91196774 Roughing End Mill 16mm 4 Flute Cobalt","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 91196774 is a single-end roughing end mill engineered for aggressive material removal in ferrous and difficult-to-machine metals. Built from M42 cobalt high-speed steel and coated with TiCN for increased surface hardness and heat resistance, this tool is designed to handle interrupted cuts and heavy chip loads that would quickly wear a standard end mill. It features 4 flutes with a fine pitch arrangement and a right-hand cutting direction, producing the controlled chip evacuation needed in roughing operations. At 16 mm in diameter with a 63 mm length of cut and 123 mm overall length, it fits standard tool holders used on CNC mills and manual knee mills alike.\u003c\/p\u003e\u003cp\u003eThis end mill is suited for roughing passes in job shop, toolroom, and production machining environments. It performs well in medium-to-high carbon steels, alloy steels, and stainless grades where a cobalt tool provides the necessary hot hardness. The centercutting geometry allows plunge entry in addition to peripheral and slot milling. It is a single-end tool, meaning it is resharpened rather than flipped, and is typically run at conservative speeds with flood coolant to maximize tool life during roughing cycles.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM42 cobalt HSS construction for elevated hot hardness and wear resistance\u003c\/li\u003e\n\u003cli\u003eTiCN coating increases surface hardness and reduces friction at the cutting edge\u003c\/li\u003e\n\u003cli\u003e4-flute fine pitch design supports controlled chip load during roughing passes\u003c\/li\u003e\n\u003cli\u003eCentercutting geometry permits direct plunge entry without pre-drilling\u003c\/li\u003e\n\u003cli\u003eRight-hand cut and right-hand flute direction for standard spindle compatibility\u003c\/li\u003e\n\u003cli\u003e16 mm shank diameter matches 16 mm collet and end mill holder tooling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in standard 16 mm collet chucks, end mill holders, and Weldon-style side-lock holders on CNC machining centers and manual milling machines.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and tool changes must be performed with the machine spindle fully stopped and the control in an e-stop or tool-change state. Use a calibrated torque wrench and appropriate end mill holder to secure the shank without runout-inducing over-tightening. Inspect the collet or holder bore for chips and wear before seating the tool. Follow the tool manufacturer feed and speed charts for cobalt HSS in the specific workpiece material before beginning a cut.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMill Diameter\u003c\/strong\u003e: 16 mm (0.6299 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Mill Material\u003c\/strong\u003e: Cobalt HSS, M42 grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\u003c\/strong\u003e: TiCN\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength of Cut\u003c\/strong\u003e: 63 mm (2.4803 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 123 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 16 mm (0.6299 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePitch\u003c\/strong\u003e: Fine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnd Type\u003c\/strong\u003e: Single End\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentercutting\u003c\/strong\u003e: Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended Reach\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Helix\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.504 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 91196774\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51729737548082,"sku":"91196774","price":199.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/917666beda752c996b36b7bc42b31389.jpg?v=1788708725","url":"https:\/\/voomisupply.com\/products\/hertel-91196774-roughing-end-mill-16mm-4-flute-cobalt","provider":"Voomi Supply","version":"1.0","type":"link"}