{"product_id":"hertel-86366069-cobalt-drill-bit-no-11-135-split-point","title":"Hertel 86366069 Cobalt Drill Bit No. 11 135 Split Point","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 86366069 is a cobalt threaded shank drill bit sized to No. 11 wire gauge, equivalent to 0.191 inches in diameter. Built for drilling into high-tensile strength metals, it features a 135-degree split point that self-centers on contact and reduces the thrust required to start a hole. The oxide coating adds surface hardness and mild corrosion resistance. Overall length is 1.25 inches, with a 9\/16-inch spiral flute length and a right-hand cutting direction. The 1\/4-28 threaded shank provides positive retention in compatible quick-change or threaded chuck systems. This bit is intended for use by machinists, aerospace maintenance technicians, and metal fabricators working with alloy steels, stainless, and other hard materials.\u003c\/p\u003e\u003cp\u003eThis drill bit is suited for production and maintenance drilling applications involving high-tensile strength metals where standard high-speed steel bits wear prematurely. The short overall length and compact flute make it practical for tight-access drilling. The web-thinned, tapered-web construction reduces cutting resistance in harder alloys. It meets NAS 965 Type D specification, making it appropriate for aerospace and military maintenance repair operations where dimensional compliance is required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo. 11 wire gauge size, 0.191 inches in diameter for precise hole sizing\u003c\/li\u003e\n\u003cli\u003e135-degree split point self-centers and reduces walking on hard surfaces\u003c\/li\u003e\n\u003cli\u003eCobalt construction provides heat resistance when drilling high-tensile strength metals\u003c\/li\u003e\n\u003cli\u003eOxide coating adds surface hardness and mild corrosion resistance\u003c\/li\u003e\n\u003cli\u003e1\/4-28 threaded shank for positive retention in compatible chuck systems\u003c\/li\u003e\n\u003cli\u003eWeb-thinned tapered web reduces cutting resistance in tough alloys\u003c\/li\u003e\n\u003cli\u003eMeets NAS 965 Type D specification for aerospace and military MRO use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use with quick-change or threaded chuck systems accepting a 1\/4-28 threaded shank. Intended for drilling high-tensile strength metals including alloy steels and stainless steel. Meets NAS 965 Type D specification.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by qualified machinists or maintenance technicians familiar with metal drilling operations. Secure the threaded shank fully into the chuck before operation to prevent slippage. Use appropriate cutting fluid when drilling hard or heat-sensitive alloys to extend bit life and maintain hole tolerance. Inspect the cutting edges before each use and replace the bit if chipping or excessive wear is observed.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire Gauge)\u003c\/strong\u003e: No. 11\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Decimal Inch)\u003c\/strong\u003e: 0.191 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 135 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Split Point\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 1.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.5625 inches (9\/16 inch)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Threaded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Thread Size\u003c\/strong\u003e: 1\/4-28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeb Configuration\u003c\/strong\u003e: Tapered, Web-Thinned\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Material\u003c\/strong\u003e: Cobalt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish\/Coating\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial Application\u003c\/strong\u003e: High-Tensile Strength Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecification\u003c\/strong\u003e: NAS 965 Type D\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.15 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 86366069\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51739044938034,"sku":"86366069","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/58167b8e767ff9c371e9903410926c38.jpg?v=1788808448","url":"https:\/\/voomisupply.com\/products\/hertel-86366069-cobalt-drill-bit-no-11-135-split-point","provider":"Voomi Supply","version":"1.0","type":"link"}