{"product_id":"hertel-83246447-straight-flute-drill-bit-wire-23-carbide","title":"Hertel 83246447 Straight-flute Drill Bit Wire 23 Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\n\u003cp\u003eThe HERTEL 83246447 is a straight-flute, solid carbide drill bit designed for precision drilling in hard and difficult-to-machine materials. Built from C2-grade carbide, this bit measures 0.154 inches in diameter (wire size 23) and features a 140-degree notched point for accurate self-centering and reduced thrust on entry. The web-thinned construction lowers cutting resistance and improves chip evacuation in demanding applications. Right-hand cutting direction is standard. The bright, uncoated finish suits use in dry or minimally lubricated conditions. Licensed machinists, tool-and-die technicians, and maintenance trades install this bit where tight tolerances and material hardness rule out standard high-speed steel tooling.\u003c\/p\u003e\n\u003cp\u003eThis drill bit is intended for production and precision machining operations involving chrome alloy, heat-treated alloy, nickel alloy, stainless steel, carbon steel, titanium alloy, and similar ferrous and high-strength materials. The 0.154-inch diameter and straight-flute geometry make it well suited to short-hole drilling, jig work, and fixture applications where hole location and diameter tolerance control are critical. The diameter tolerance of +0.0000 to -0.0005 inches supports close-fit hole requirements without reaming in some applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSolid C2-grade carbide construction for hardness and wear resistance in alloy and stainless steel drilling\u003c\/li\u003e\n  \u003cli\u003e140-degree notched point promotes accurate entry and reduces walking on hard surfaces\u003c\/li\u003e\n  \u003cli\u003eWeb-thinned design lowers cutting thrust and improves chip flow in straight-flute geometry\u003c\/li\u003e\n  \u003cli\u003eTight diameter tolerance of +0.0000 to -0.0005 inches for controlled hole sizing\u003c\/li\u003e\n  \u003cli\u003eBright, uncoated finish compatible with dry cutting and standard cutting fluids\u003c\/li\u003e\n  \u003cli\u003eRight-hand cutting direction; 2-flute configuration standard for straight-flute drills\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eDesigned as a direct-replacement or standard-stock straight-flute carbide drill bit for machining operations in chrome alloy, heat-treated alloy, nickel alloy, stainless steel, steel, and titanium alloy workpieces where wire size 23 diameter is specified.\u003c\/p\u003e\n\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\n\u003cp\u003eInstallation and use should be performed by qualified machinists or tool technicians familiar with carbide tooling requirements. Secure the shank firmly in a compatible drill chuck or collet rated for the 0.154-inch shank diameter before use. Carbide bits are brittle and susceptible to fracture under side-load or impact; avoid interrupted cuts without confirming suitability. Always verify spindle speed and feed rate against the workpiece material before engaging the cut.\u003c\/p\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Type\u003c\/strong\u003e: Straight-Flute\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Size (Wire)\u003c\/strong\u003e: 23\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter (Decimal)\u003c\/strong\u003e: 0.1540 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 0.1540 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 140 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Notched\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeb Thinning\u003c\/strong\u003e: Web-Thinned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaterial Grade\u003c\/strong\u003e: C2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoolant Through\u003c\/strong\u003e: No\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDiameter Tolerance\u003c\/strong\u003e: +0.0000 to -0.0005 inches\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Materials\u003c\/strong\u003e: Chrome Alloy, Heat-Treated Alloy, Nickel Alloy, Stainless Steel, Steel, Titanium Alloy\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.1 pounds\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackage Quantity\u003c\/strong\u003e: 1\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eStandard Information\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 83246447\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51731811041586,"sku":"83246447","price":37.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/5f6d3ff2d306c40ecc6c86b50bc3f152.jpg?v=1788735184","url":"https:\/\/voomisupply.com\/products\/hertel-83246447-straight-flute-drill-bit-wire-23-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}