{"product_id":"hertel-79889374-chucking-reamer-0-119-in-solid-carbide","title":"Hertel 79889374 Chucking Reamer 0.119 in Solid Carbide","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 79889374 is a solid carbide chucking reamer designed for precision hole finishing in machine shop and production environments. With a reamer diameter of 0.119 inches and a diameter tolerance of 0.0000 to 0.0002 inches, this tool delivers tight, repeatable hole sizing in a single pass. The 4-flute straight flute geometry and bright uncoated finish make it well suited for non-ferrous metals, plastics, and other materials that benefit from a sharp, uncoated cutting edge. Overall length is 2.25 inches with a flute length of 0.625 inches. The straight cylindrical shank mounts directly in standard drill chucks, collet chucks, or machine spindles. Licensed machinists, toolroom technicians, and CNC operators are the primary users of this tool.\u003c\/p\u003e\u003cp\u003eThis chucking reamer is intended for use in drill presses, CNC machining centers, lathes, and manual milling machines where a floating or rigid reamer holder can be applied. It is suited for finish reaming holes in the 0.100 to 0.1499 inch diameter range. The right-hand cutting direction is standard for conventional spindle rotation. Applications include precision bore finishing in production runs and toolroom work where close hole tolerances are required.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSolid carbide construction for rigidity and wear resistance in demanding cutting conditions\u003c\/li\u003e\n\u003cli\u003eReamer diameter tolerance of 0.0000 to 0.0002 inches for tight, repeatable hole sizing\u003c\/li\u003e\n\u003cli\u003e4-flute straight flute design for smooth material removal and clean hole finish\u003c\/li\u003e\n\u003cli\u003eBright uncoated finish suited for non-ferrous metals and plastics\u003c\/li\u003e\n\u003cli\u003eStraight cylindrical shank for direct mounting in standard chucks and collet holders\u003c\/li\u003e\n\u003cli\u003eRight-hand cutting direction for use with conventional spindle rotation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned as a standard chucking reamer for use in any machine tool capable of holding a straight cylindrical shank and rotating in the right-hand direction, including drill presses, CNC machining centers, and engine lathes.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eA licensed machinist or toolroom technician should install this reamer in a properly sized chuck or collet to minimize runout before cutting. Power down the machine and confirm the spindle is fully stopped before changing tooling. A reaming allowance of 0.001 to 0.005 inches is typical practice, but always verify the pre-drilled hole size against the specific material and application requirements. Do not force the reamer through an undersized hole or use it as a drill.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter\u003c\/strong\u003e: 0.119 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReamer Diameter Tolerance\u003c\/strong\u003e: 0.0000 to 0.0002 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 2.25 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 0.625 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flutes\u003c\/strong\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Straight Cylindrical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: Solid Carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Bright\/Uncoated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.05 pounds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUNSPSC Code\u003c\/strong\u003e: 23241611\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 79889374\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51737985188146,"sku":"79889374","price":82.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/fdd4ee25ba92c62fa1bc07e7c733f9b1.jpg?v=1788795456","url":"https:\/\/voomisupply.com\/products\/hertel-79889374-chucking-reamer-0-119-in-solid-carbide","provider":"Voomi Supply","version":"1.0","type":"link"}