{"product_id":"hertel-77428977-reduced-shank-drill-bit-1-1-8-in-hss","title":"Hertel 77428977 Reduced Shank Drill Bit 1-1\/8 in Hss","description":"\u003ch3\u003eProduct Description\u003c\/h3\u003e\u003cp\u003eThe HERTEL 77428977 is a reduced shank twist drill bit designed for drilling into low and medium tensile strength materials. The bit features a 1-1\/8 inch cutting diameter with a 1\/2 inch Weldon flat shank, allowing it to seat securely in side-lock toolholders without slipping under load. The 118-degree standard point angle is a general-purpose geometry suited for a wide range of ferrous and non-ferrous stock. Manufactured from high-speed steel with an oxide finish, this bit is a workhorse tool for metal fabrication shops, HVAC contractors, plumbers, and electricians who drill large-diameter holes through structural steel, pipe flanges, and similar workpieces.\u003c\/p\u003e\u003cp\u003eThis drill bit fits standard applications requiring a large-diameter hole where a full-size shank would not fit the available toolholder or drill chuck. The reduced 1\/2 inch Weldon shank makes it compatible with common 1\/2 inch side-lock holders on drill presses, magnetic drills, and hand-held drill motors. With a 3 inch flute length and 6 inch overall length, it provides sufficient reach for most panel and structural drilling tasks encountered in mechanical and electrical trade work.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1-1\/8 inch cutting diameter with reduced 1\/2 inch Weldon flat shank for side-lock toolholder compatibility\u003c\/li\u003e\n\u003cli\u003e118-degree standard point angle for general-purpose drilling in low and medium tensile strength materials\u003c\/li\u003e\n\u003cli\u003eHigh-speed steel construction for durability across repeated use cycles\u003c\/li\u003e\n\u003cli\u003eOxide finish provides mild corrosion resistance and reduces friction during cutting\u003c\/li\u003e\n\u003cli\u003e3-flat Weldon shank design prevents bit rotation and slippage under load\u003c\/li\u003e\n\u003cli\u003eRight-hand spiral flute with regular helix for effective chip evacuation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eDesigned for use in 1\/2 inch side-lock Weldon toolholders on drill presses, magnetic base drills, and compatible handheld drill motors. Intended for drilling low and medium tensile strength materials.\u003c\/p\u003e\u003ch4\u003eInstallation Notes\u003c\/h4\u003e\u003cp\u003eInstallation and use should be performed by qualified tradespeople familiar with metalworking drill procedures. Secure the Weldon flat shank fully into the side-lock holder and tighten the set screw against the flat before drilling. Always power down and isolate the drill motor before changing bits. This bit is rated for dry drilling only  -  coolant is not recommended for this configuration.\u003c\/p\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Bit Diameter\u003c\/strong\u003e: 1-1\/8 inches (1.1250 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Diameter\u003c\/strong\u003e: 1\/2 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShank Type\u003c\/strong\u003e: Weldon Flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Flats\u003c\/strong\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Length\u003c\/strong\u003e: 6 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Length\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Drilling Depth\u003c\/strong\u003e: 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill Point Angle\u003c\/strong\u003e: 118 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoint Type\u003c\/strong\u003e: Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool Material\u003c\/strong\u003e: High-Speed Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating\/Finish\u003c\/strong\u003e: Oxide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlute Type\u003c\/strong\u003e: Spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral Type\u003c\/strong\u003e: Regular\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCutting Direction\u003c\/strong\u003e: Right Hand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoolant\u003c\/strong\u003e: No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Workpiece Material\u003c\/strong\u003e: Low and Medium Tensile Strength Materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 0.9 pounds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eStandard Information\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand\u003c\/strong\u003e: HERTEL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Part Number\u003c\/strong\u003e: 77428977\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HERTEL","offers":[{"title":"Default Title","offer_id":51741963944242,"sku":"77428977","price":150.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0270\/4519\/9983\/files\/6e022bc68cac65e60d17ba67584702b0.jpg?v=1788834605","url":"https:\/\/voomisupply.com\/products\/hertel-77428977-reduced-shank-drill-bit-1-1-8-in-hss","provider":"Voomi Supply","version":"1.0","type":"link"}